We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft C13 to C14 power extension cable 14AWG 15A

Tripp Lite

Tripp Lite P005-003 computer power extension cord 3 ft 14AWG 15A C14 to C13

SKU CH-XCMH-69JQS MPN P005-003

A three-foot heavy-duty cord extends a C13 connection using 14 AWG conductors rated for 15 A at 100-250 V AC

  • TypeCables - Speaker Wires
  • ColorBlack
  • Length3 ft
  • Connector Number2
  • Connector DetailConnector on First End:IEC 60320 C13 Connector on Second End
  • SpecificationsVoltage Rating:250 V AC
  • Extends reach by 3 ft for flexible placement
  • 14 AWG conductors support 15 A continuous load
  • IEC 60320 C13 to C14 fits most PSUs and PDUs
  • Rated 100-250 V AC for worldwide compatibility
  • Lifetime warranty reflects durable construction

Power extension for C13 devices

The Tripp Lite P005-003 is a 3 ft heavy-duty cord that connects a C14 inlet to a C13 outlet. It suits servers, UPS units and PDUs that need a short reach between rack-mounted equipment. The 14 AWG conductors support a 15 A rating at up to 250 V AC.

Replaces shorter fixed leads

Use this cord when the factory cable on a power supply or PDU falls short of the distribution unit. The 3 ft length clears typical rack gaps without leaving excess slack that blocks airflow. It is not for runs that need more reach or for outdoor installations.

Check connector gender and amp draw

Verify the source end is a C14 inlet and the load end accepts a C13 plug before ordering. Confirm the connected equipment draws no more than 15 A at your supply voltage. The cord carries a lifetime warranty from the manufacturer.

Highlights

  • Extends reach by 3 ft for flexible placement
  • 14 AWG conductors support 15 A continuous load
  • IEC 60320 C13 to C14 fits most PSUs and PDUs
  • Rated 100-250 V AC for worldwide compatibility
  • Lifetime warranty reflects durable construction

Specifications

BrandTripp Lite
ModelP005-003
TypeCables - Speaker Wires
ColorBlack
Length3 ft
Connector Number2
Connector DetailConnector on First End:IEC 60320 C13
Connector on Second End:IEC 60320 C14
SpecificationsVoltage Rating:250 V AC
FeaturesStandard Warranty:Lifetime
Shipping weight0.19 kg
Package size311 × 201 × 25 mm

Questions about this item

What clearance is needed for the IEC 60320 C13 and C14 connectors on this 3 ft cord?

The C13 and C14 connectors are standard IEC 60320 types; allow enough depth behind the device for the moulded plug body and the 14 AWG cable bend radius.

Which end plugs into the power source and which end connects to the equipment?

Connect the IEC 60320 C14 plug to the power source or PDU outlet, then attach the IEC 60320 C13 connector to the device inlet; reversing them will not work.

When should this 14 AWG, 15 A extension cord be replaced?

Replace the cord if the black jacket shows cuts, the connectors feel loose, or the cable becomes warm during normal 100-250 V AC operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.