Tripp Lite
Tripp Lite P004-004-13A 4ft C14 to C13 16 AWG computer power cord
A 4 ft C14-to-C13 power cord rated 13 A at 250 V with 16 AWG conductors
- Length48 inches
- Connector DetailC14 to C13
- SpecificationsVoltage: 250 volts; Weight: 0.35 lb; UL Listed: true
- 4 ft length fits tight rack spaces
- C14 to C13 connectors link PSU to IEC inlet
- 16 AWG wire carries 13 A at 250 V
- UL Listed for verified safety compliance
- Weighs 0.35 lb for lightweight cable runs
Power Cord for C14-to-C13 Devices
The Tripp Lite P004-004-13A is a 4ft computer power cord rated 13A at up to 250V. It uses 16 AWG conductors and UL-listed construction. The cable connects equipment with a C14 inlet to a C13 outlet or PDU.
Verify Connector Gender and Length
Confirm the source side has a C14 inlet and the load side accepts a C13 plug before ordering. The fixed length is 48 inches, so measure the routing path between the two devices to ensure adequate reach without tension.
Passive Cable Thermals and Draw
As a passive cord it generates no fan noise and adds no active heat beyond normal conductor loss at the rated 13A load. The 16 AWG gauge handles the specified current within UL temperature limits during typical continuous use.
Highlights
- 4 ft length fits tight rack spaces
- C14 to C13 connectors link PSU to IEC inlet
- 16 AWG wire carries 13 A at 250 V
- UL Listed for verified safety compliance
- Weighs 0.35 lb for lightweight cable runs
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | P004-004-13A |
| Length | 48 inches |
| Connector Detail | C14 to C13 |
| Specifications | Voltage: 250 volts; Weight: 0.35 lb; UL Listed: true |
Questions about this item
What connectors come on the P004-004-13A and do I need any extra adapters?
The cord has a C14 plug on one end and a C13 connector on the other. No extra adapters are included or required for standard C13/C14 equipment.
Should I choose a different length or gauge for a server rack installation?
This model is 48 inches long and uses 16 AWG conductors rated at 13 A. Select another Tripp Lite model if you need a longer reach or a heavier gauge.
What does the 250 V rating mean when the cord is used in a 100 V to 250 V environment?
The cord is rated for up to 250 volts and 13 amps across the full 100 V to 250 V range, so it safely handles both North American and international voltages.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



