We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua MTP/MPO OM3 fibre loopback tester with push-pull tab and dust cover

Tripp Lite

Tripp Lite N844-LOOP-12F MTP/MPO OM3 fibre optic loopback tester

SKU CH-JVQ9-5TJ31 MPN N844-LOOP-12F

A 12-fibre OM3 loopback tester with MTP/MPO connectors, push-pull tab and dust cover for quick network testing

  • TypeMTP / MPO Fiber Optic Loopback Tester
  • ColorAqua
  • SpecificationsTripp Lite N844-LOOP-12F MTP / MPO OM3 Fiber Optic Loopback
  • FeaturesMTP / MPO OM3 Loopback Tester Push-pull tab for quick discon
  • Tests MTP/MPO links with OM3 multimode 50/125 µm fibre
  • Push-pull tab enables fast disconnect during test cycles
  • Protective dust cover shields ferrules when stored
  • Four-inch length fits dense patch-panel layouts
  • Pin mapping 1-12 through 6-7 verifies full channel continuity

Test and Measurement Tool

The Tripp Lite N844-LOOP-12F is a fibre optic loopback tester designed for network engineers and technicians performing signal verification in MTP/MPO environments. It supports test and measurement procedures by returning the transmitted signal directly back to the source equipment. The aqua housing identifies the multimode OM3 rating at a glance.

Multimode OM3 Pin Configuration

The single specification that determines compatibility is the pin mapping: 1-12, 2-11, 3-10, 4-9, 5-8, 6-7 across twelve fibres. This tester is built for 50/125 µm multimode fibre rated to OM3 standards. It will not function in single-mode links or in systems requiring a different fibre count or polarity scheme.

Passive Operation

As a passive loopback device it draws no power and generates no heat or noise during normal use. The push-pull tab allows quick insertion and removal from dense patch panels without tools. A protective dust cover shields the female MTP/MPO connector from contamination during storage. Buyers needing active signal regeneration or protocol analysis require a different class of instrument.

Highlights

  • Tests MTP/MPO links with OM3 multimode 50/125 µm fibre
  • Push-pull tab enables fast disconnect during test cycles
  • Protective dust cover shields ferrules when stored
  • Four-inch length fits dense patch-panel layouts
  • Pin mapping 1-12 through 6-7 verifies full channel continuity

Specifications

BrandTripp Lite
ModelN844-LOOP-12F
TypeMTP / MPO Fiber Optic Loopback Tester
ColorAqua
SpecificationsTripp Lite N844-LOOP-12F MTP / MPO OM3 Fiber Optic Loopback Tester is typically used for test and measurement procedures in networking environments.The device is ideal for a multitude of applications that require signal looping in a MTP / MPO form factor. Features push-pull tab for easy disconnect. A dust cap is included for protection during storage.
FeaturesMTP / MPO OM3 Loopback Tester
Push-pull tab for quick disconnect
Protective dust cover included for protection during storage
4-inch overall length
Pin config: 1 -12, 2-11, 3-10, 4-9, 5-8, 6-7
Shipping weight0.01 kg
Package size150 × 102 × 13 mm

Questions about this item

What does the 12-fibre pin configuration actually do in a live link?

The pin map pairs fibres 1–12, 2–11, 3–10, 4–9, 5–8 and 6–7 so each transmit path loops straight back to its matching receive path for end-to-end verification.

Which MTP/MPO standard does the tester follow and what bandwidth does that support?

It is built to the OM3 50/125 µm multimode specification, which is rated for 10 Gb/s and higher speeds over short-reach links.

Will the 4-inch body and push-pull tab fit inside a high-density patch panel?

The 4-inch overall length and integrated push-pull tab are designed for tight panel spacing, allowing quick insertion and removal without tools.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.