We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fiber patch cable with LC connectors on both ends, 10 meter length

Tripp Lite

Tripp Lite N370-10M 10m Duplex Singlemode Fiber Optic Patch Cable LC/LC Yellow

SKU CH-7S1Q-E4JX0

A 10 metre duplex singlemode fibre patch cable with LC connectors on both ends, rated FDDI and OFNR for LAN use

  • Singlemode 8.3/125 µm core for long-distance links
  • 10 m (33 ft) length reaches across racks or rooms
  • LC/LC duplex connectors plug straight into compatible transceivers
  • Yellow PVC jacket identifies singlemode at a glance
  • FDDI and OFNR ratings meet building-code requirements

10-metre singlemode duplex patch cable

This 10-metre duplex singlemode fibre patch cable connects network equipment using LC connectors on both ends. It is built with 8.3/125 micron zipcord fibre and a yellow PVC jacket rated FDDI and OFNR. The assembly suits LAN links that require singlemode transmission over moderate distances.

Passive fibre link thermals and power

As a passive optical cable it draws no electrical power and generates no heat of its own. No fans or active components are present, so acoustic noise is zero. The only thermal contribution comes from the transceivers at each end, which the cable does not affect.

Sustained link behaviour

Insertion loss and return loss remain stable for the life of the cable because there are no active circuits to degrade. The OFNR jacket maintains its fire rating under continuous installation conditions. Performance is limited only by the connected transceivers and the 8.3/125 fibre geometry.

Highlights

  • Singlemode 8.3/125 µm core for long-distance links
  • 10 m (33 ft) length reaches across racks or rooms
  • LC/LC duplex connectors plug straight into compatible transceivers
  • Yellow PVC jacket identifies singlemode at a glance
  • FDDI and OFNR ratings meet building-code requirements

Specifications

BrandTRIPP LITE
ModelN370-10M

Questions about this item

How do I connect the LC connectors on this 10-meter duplex singlemode cable without damaging the 8.3/125 micron fiber?

Align the keyed LC ferrules with the port, push straight in until the latch clicks, and avoid bending the yellow PVC jacket tighter than the minimum bend radius to protect the 8.3/125 micron core.

What upkeep will the LC/LC singlemode patch cable need over time?

Inspect the LC end faces for dust or scratches before each reconnect, clean with a singlemode-rated fiber cleaner, and replace the 10-meter assembly if insertion loss rises or the OFNR-rated jacket shows cracking.

What distance or loss limit appears first when running this 33-foot singlemode link continuously?

The 33-foot length keeps attenuation well below typical singlemode budgets, so the first practical limit is usually connector cleanliness or a macrobend on the 8.3/125 micron fiber rather than cable distance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.