We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite N366-05M 5m duplex singlemode 8.3/125 fiber patch cable LC/SC 16.4 ft yellow

SKU CH-P1WN-7MX2K

A 5-metre duplex singlemode patch cable with LC and SC connectors for 8.3/125 micron fibre links

  • 5 m length spans 16.4 ft for flexible rack-to-rack runs
  • Duplex singlemode 8.3/125 µm core supports long-distance LAN links
  • LC-to-SC connectors join dissimilar transceiver interfaces directly
  • OFNR-rated PVC jacket meets riser fire-safety requirements
  • Yellow jacket colour simplifies singlemode cable identification

Singlemode duplex patch cable

This 5-metre singlemode duplex patch cable connects equipment with LC and SC interfaces using 8.3/125 micron fibre. The yellow PVC jacket is OFNR rated for riser installations. It suits LAN links that require singlemode transmission over moderate distances.

LC to SC connectivity in a riser run

One end carries an LC singlemode connector, the other an SC singlemode connector, so it bridges transceivers or patch panels with mismatched ports. The duplex zipcord construction keeps transmit and receive fibres paired without extra cable management. Riser rating allows vertical routing between floors.

Low-loss singlemode performance over 16.4 ft

Singlemode 8.3/125 fibre maintains signal integrity across the full 16.4-foot length with minimal attenuation. The OFNR jacket resists flame spread in vertical shafts, supporting stable operation in sustained-use backbone links. Yellow colour coding identifies the singlemode run at a glance.

Highlights

  • 5 m length spans 16.4 ft for flexible rack-to-rack runs
  • Duplex singlemode 8.3/125 µm core supports long-distance LAN links
  • LC-to-SC connectors join dissimilar transceiver interfaces directly
  • OFNR-rated PVC jacket meets riser fire-safety requirements
  • Yellow jacket colour simplifies singlemode cable identification

Specifications

BrandTRIPP LITE
ModelN366-05M

Questions about this item

How far can the 8.3/125 micron singlemode fiber carry a signal before attenuation limits the link?

Singlemode 8.3/125 fibre typically supports kilometres of reach; this 16.4 ft patch cable adds negligible loss and is not the limiting factor in a LAN span.

Does the PVC jacket and OFNR riser rating mean the cable runs hot or needs special cooling in a rack?

The cable is passive with no power draw, so it generates no heat and requires no cooling; the OFNR rating only governs flame spread in vertical runs.

Which transceivers or patch panels must I already have to mate with the LC and SC connectors on this duplex lead?

You need equipment with LC singlemode ports on one side and SC singlemode ports on the other, both polished for 8.3/125 µm fibre.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.