We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fibre patch cable with four SC connectors

Tripp Lite

Tripp Lite N356-01M 3.2 ft duplex singlemode fibre optic cable

SKU CH-GVEV-5YD8A MPN N356-01M

A 3.2 ft yellow duplex singlemode fibre patch cable with SC connectors on each end, factory tested for 0.2 dB typical insertion loss

  • TypeOthers
  • ColorYellow
  • Length3.2 ft.
  • Connector Number4
  • FeaturesManufactured from 8.3/125 duplex (zipcord) fiber PVC jacket
  • 2 ft length suits short rack-to-rack runs
  • Duplex 8.3/125 µm singlemode fibre for long-distance links
  • SC connectors on both ends enable quick patching
  • Every connector tested at 0.2 dB typical insertion loss
  • Yellow PVC jacket identifies singlemode cable at a glance

Duplex Singlemode Fibre Patch Cable

The Tripp Lite N356-01M is a 3.2 ft duplex singlemode fibre optic patch cable built for short-distance network links. Yellow PVC jacket protects the 8.3/125 µm zipcord fibre. Two SC connectors on each end provide four total connection points for patch panels or transceivers.

Suits Single-Link 1 m Runs.

This cable suits installers who need a single factory-terminated 1 metre link between two SC ports. Buyers who need longer reach, higher connector counts or pre-terminated multi-fibre assemblies should look at other products.

0.2 dB Typical Insertion Loss Verified Per Connector

Every connector is insertion-loss tested at the factory with a typical result of 0.2 dB and the test record ships with the cable. That single verified figure confirms the link budget for the intended 1 metre span.

Highlights

  • 2 ft length suits short rack-to-rack runs
  • Duplex 8.3/125 µm singlemode fibre for long-distance links
  • SC connectors on both ends enable quick patching
  • Every connector tested at 0.2 dB typical insertion loss
  • Yellow PVC jacket identifies singlemode cable at a glance

Specifications

BrandTripp Lite
ModelN356-01M
TypeOthers
ColorYellow
Length3.2 ft.
Connector Number4
FeaturesManufactured from 8.3/125 duplex (zipcord) fiber
PVC jacket
Connectors: 2 SC connectors on each end
Insertion loss testing performed on every connector (0.2db typical) and provided with cable
Beveled edge on ends of glass makes insertion of plug a breeze
Fiber made from glass (not a polymer)
Color coded shrouds identify transmit and receive
Fiber optic distributed data interface (FDDI) rated
Shipping weight0.45 kg
Package size102 × 102 × 23 mm

Questions about this item

Does the 8.3/125 µm singlemode fibre generate noticeable heat or draw extra power during continuous operation?

The passive fibre and connectors add no heat or power draw; only the active transceivers at each end consume electricity.

What transceiver modules must I already own to use the SC connectors on this patch cable?

You need SFP, SFP+ or QSFP transceivers with SC receptacles that match the 8.3/125 µm singlemode specification.

Will the 8.3/125 µm singlemode cable work with legacy multimode equipment I still have?

Singlemode and multimode cores differ, so this cable cannot be used directly with older multimode ports or transceivers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.