We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige shielded crossover Ethernet cable with RJ45 male connectors, 7 ft length

Tripp Lite

Tripp Lite N266-007 7 ft Shielded RJ48C Crossover Network Ethernet Cable

SKU CH-DAGC-ZRFMW MPN N266-007

A 7 ft shielded RJ48C crossover patch cable with RJ45 male connectors for direct T1 network links

  • TypeT1 Cross-Over Cables
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length7 ft.
  • ColorBeige
  • ShieldedYes
  • 7 ft length suits short rack or desk runs
  • Shielded construction reduces electromagnetic interference
  • RJ48C crossover wiring enables direct T1 circuit links
  • Copper conductors meet ANSI T1.403 performance standard
  • RoHS compliant materials support environmental requirements

Direct-connect T1 link

The Tripp Lite N266-007 is a 7 ft shielded crossover cable terminated with RJ45 male plugs on both ends. It is built for technicians and installers who need a direct T1 circuit between two network devices without an intermediate hub or switch.

Stable signal over the full run

Shielded construction and copper conductors suppress electromagnetic interference across the 7 ft length. The cable meets ANSI T1.403 requirements, so sustained T1 framing and signalling remain within specification during continuous operation.

Replaces a straight-through patch lead

It upgrades any existing straight-through patch cord when the application demands a crossover pin-out for T1 equipment. The change is worthwhile only when both endpoints require the transmit and receive pairs swapped; standard Ethernet links will not function with this cable.

Highlights

  • 7 ft length suits short rack or desk runs
  • Shielded construction reduces electromagnetic interference
  • RJ48C crossover wiring enables direct T1 circuit links
  • Copper conductors meet ANSI T1.403 performance standard
  • RoHS compliant materials support environmental requirements

Specifications

BrandTRIPP LITE
ModelN266-007
TypeT1 Cross-Over Cables
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length7 ft.
ColorBeige
ShieldedYes
FeaturesCable Characteristic: Patch Cable
Cable Configuration: Crossover
Conductor: Copper
Certifications & Standards: ANSI T1.403
Green Compliance: Yes
Green Compliance Certificate/Authority: RoHS
Shipping weight0.16 kg
Package size239 × 224 × 5 mm

Questions about this item

Does the shielded construction keep the 7 ft crossover link stable when the cable runs alongside power leads all day?

The N266-007 uses a shielded RJ48C crossover design with copper conductors that resist electromagnetic interference, so the 7 ft link stays reliable even in electrically noisy environments.

What equipment must already have RJ48C ports for this T1 crossover cable to plug straight in?

Both endpoints need RJ48C interfaces wired for T1 crossover operation — typical examples are CSU/DSU units, T1 routers or dedicated T1 network cards with matching pin-outs.

Will the ANSI T1.403 crossover pin-out work with older T1 gear that expects straight-through RJ48C wiring?

No — this cable crosses the transmit and receive pairs to meet ANSI T1.403, so it only connects two T1 DTE ports directly; legacy straight-through links need a different cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.