Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Tripp Lite
Bulk Cat6 stranded cable on a 1000 ft reel, CMR-rated for in-wall runs and tested to 250 MHz for Gigabit Ethernet
This 1000-foot reel of Cat6 stranded cable is made for installers building custom patch cords on site. The 24 AWG 4-pair copper conductors and CMR-rated PVC jacket suit in-wall and riser runs. White colour helps identify the cable in mixed bundles.
The cable is channel-tested to 250 MHz and supports up to 1 Gbps Ethernet, 100 Mbps TPDDI and 155 Mbps ATM. It meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards. Impedance and structural return loss are lower than standard 100 MHz wire, so performance drops if runs exceed the rated frequency.
The 0.22-inch overall diameter and absence of a centre spline make RJ45 plug termination quicker than solid-core alternatives. Stranded conductors tolerate repeated flexing during assembly but are not suited for punch-down blocks or long horizontal runs where solid wire is required.
| Brand | TRIPP LITE |
|---|---|
| Model | N220-01K-WH |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | BARE WIRE |
| Connector B | BARE WIRE |
| Length | 1000 ft. |
| Color | White |
| Features | Less impedance and structural return loss than 100 MHz wire Channel-tested to 250 MHz/1 Gbps communications High-quality 24 AWG 4-pair stranded copper wire CMR-rated PVC jacket Meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards |
| Shipping weight | 11.95 kg |
| Package size | 457 × 406 × 305 mm |
The stranded 24 AWG construction with no centre spline and a 0.22 inch diameter is designed for easy RJ45 plug termination, making it the practical choice for DIY patch cord assembly.
Channel-tested to 250 MHz, the cable supports 1 Gbps communications and is rated for 10/100/1000 Base-T Ethernet, delivering the bandwidth needed for full Gigabit throughput.
The CMR rating means the jacket meets riser flame-test requirements, so the cable can be installed in vertical shafts and general-purpose horizontal runs without needing plenum-grade material.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?