We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite N201-003-GY Cat 6 network ethernet cable 3 ft gray

SKU CH-VN2T-2GWD6 MPN N201-003-GY

A 3 ft gray Cat 6 patch cable with RJ45 male connectors for gigabit Ethernet up to 550 MHz

  • TypeFiber
  • Cat6
  • Connector ARJ45 (MALE)
  • Connector BRJ45 (MALE)
  • Length3 ft.
  • ColorGray
  • Cat 6 rating supports gigabit speeds up to 550 MHz
  • Snagless boot protects RJ45 connectors from damage during routing
  • 3 ft length suits tight desk or patch-panel runs
  • Staggered-pin plug design minimises near-end crosstalk
  • Meets EIA/TIA 568-B-2.1 draft 9 and UL verified standards

3 ft Cat 6 patch cable

This 3 ft Cat 6 patch cable connects two RJ45 ports with a straight-through pinout. It is built for Cat 6, Cat 5e and Cat 5 network runs where a short, unshielded link is required. The gray jacket and snagless boots suit desktop, patch-panel or wall-plate installations. The cable is UL verified and meets EIA/TIA Cat 6 and TIA/EIA-568-B.2-1 draft 9 standards.

Capacity and headroom

Rated to 550 MHz, the cable carries gigabit Ethernet with margin for typical PoE loads and voice or video streams. Unshielded construction keeps the cable flexible but offers no protection against strong EMI sources such as fluorescent ballasts or motor drives. At 3 ft the length suits rack-to-rack or device-to-switch jumps; longer runs need a longer cable.

Unshielded Cat 6

The single deciding specification is the unshielded Cat 6 rating at 550 MHz. If the installation demands foil or braid shielding, alien-crosstalk mitigation or a plenum jacket, this cable does not meet those requirements.

Highlights

  • Cat 6 rating supports gigabit speeds up to 550 MHz
  • Snagless boot protects RJ45 connectors from damage during routing
  • 3 ft length suits tight desk or patch-panel runs
  • Staggered-pin plug design minimises near-end crosstalk
  • Meets EIA/TIA 568-B-2.1 draft 9 and UL verified standards

Specifications

BrandTRIPP LITE
ModelN201-003-GY
TypeFiber
Cat6
Connector ARJ45 (MALE)
Connector BRJ45 (MALE)
Length3 ft.
ColorGray
ShieldedNo
FeaturesMeets category 6 cabling standards
Premium cabling for category 6, category 5e and category 5 applications
Length: 3 ft./Color: gray/Connectors: RJ45 male
Drastically reduce impedance and structural return loss compared to standard 100MHz wire
High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum
Feature molded connectors with integral strain relief
Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation
PVC 4-pair stranded UTP
Deliver stable performance up to 550MHz/1 Gbp
Shipping weight0.45 kg
Package size102 × 102 × 23 mm

Questions about this item

Will the 3 ft Cat 6 cable work with my existing Cat 5e switch and router?

Yes, the cable is designed for Category 6, Category 5e and Category 5 applications so it will connect to your current hardware without issues.

How can I verify the cable is performing to the 550 MHz rating after I plug it in?

Run a cable certifier or use your switch port statistics to confirm link speed and low error counters at Gigabit rates.

Does the package include only the gray 3 ft patch cord or are wall plates and keystones also supplied?

The box contains the single 3 ft gray RJ45 male-to-male patch cable; wall plates, keystones or additional cables are sold separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.