Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00085882BTC
In stock
Tripp Lite
Tripp Lite N201-001-BK network ethernet cable 1 ft Cat6 black
One-foot Cat6 patch cable with snagless RJ45 connectors rated for 550 MHz gigabit links
- TypeNetwork Cable
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length1 ft.
- ColorBlack
- Rated for 550 MHz and 1 Gbps communications
- Snagless boots protect locking tabs from damage during installation
- Meets Category 6 specifications to reduce cross-talk and return loss
- PVC 4-pair stranded UTP construction for flexible patch-cable use
- 1 ft length suited for short rack or desktop connections
One-foot Cat6 patch cable
The Tripp Lite N201-001-BK is a one-foot Category 6 UTP patch cable with RJ45 male connectors on both ends. It is rated for 550 MHz and 1 Gbps communication, making it suitable for Gigabit Ethernet links in rack, desk or wall-plate installations. The black PVC jacket uses four-pair stranded conductors for flexible routing.
Snagless boots protect the latch
Moulded boots with integral strain relief cover the RJ45 locking tabs, preventing them from catching or snapping off when the cable is pulled through tight pathways. The snagless design allows repeated insertion and removal without damaging the connector or the port. Stranded conductors tolerate the tight bends common in short patch runs.
Verify port spacing and length
Confirm that a one-foot reach spans the distance between your two RJ45 ports without tension on the connectors. Check that adjacent ports have enough clearance for the moulded boot width, especially in high-density patch panels or switch stacks. Ensure both devices use standard RJ45 jacks compatible with Category 6 wiring.
Highlights
- Rated for 550 MHz and 1 Gbps communications
- Snagless boots protect locking tabs from damage during installation
- Meets Category 6 specifications to reduce cross-talk and return loss
- PVC 4-pair stranded UTP construction for flexible patch-cable use
- 1 ft length suited for short rack or desktop connections
Specifications
| Brand | TRIPP LITE |
|---|---|
| Model | N201-001-BK |
| Type | Network Cable |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 1 ft. |
| Color | Black |
| Features | Premium cabling for category 6, category 5e and category 5 applications Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation Connectors: RJ45 male Drastically reduce impedance & structural return loss compared to standard 100MHz wire High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum Feature molded connectors with integral strain relief Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft |
| Shipping weight | 0.02 kg |
| Package size | 185 × 132 × 18 mm |
Questions about this item
How can I confirm the cable is passing traffic at gigabit speed after I plug it in?
Watch the port LEDs on your switch or NIC; a steady or blinking light that the manufacturer designates for 1 Gbps shows the link is up.
What comes in the package and is anything else required to use it?
The box contains the 1 ft Cat6 patch cable with RJ45 male connectors on both ends; no additional parts are needed for a standard Ethernet connection.
Which length or category version should I pick for a short rack-to-rack run?
Choose this 1 ft Cat6 model when you need a short, snagless patch lead rated for 550 MHz and gigabit Ethernet.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00083528BTC
In stock
