We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-foot gray Ethernet cable with molded RJ-45 connectors

Tripp Lite

Tripp Lite N200-006-GY 6 ft network ethernet cable

SKU CH-CCVY-GPDBB MPN N200-006-GY

Connects network devices with a 6 ft Cat6 patch cable rated for 1 Gbps and 550 MHz performance

  • TypeConsumer Electronics
  • CatRJ-45
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length6 ft
  • ColorGray
  • Supports gigabit speeds up to 1000 Mbps with 550 MHz bandwidth
  • Gold-plated contacts resist corrosion for lasting signal integrity
  • Staggered-pin plug design minimizes near-end crosstalk
  • Molded strain relief protects connectors from damage during use
  • Flexible stranded 24 AWG construction suits tight routing spaces

Ready-to-use Cat6 patch cable

The Tripp Lite N200-006-GY is a six-foot gray patch cable with male RJ-45 connectors on both ends. It is built for Cat5, Cat5e and Cat6 network applications in home or office environments. The cable supports 1000Base-T, 10/100Base-T, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring Type 3 uses.

Gold-plated contacts and molded strain relief

Corrosion-resistant gold-plated copper contacts maintain clean signal transfer over time. The molded boot design integrates strain relief to protect the connector junction from bending stress. A staggered-pin plug layout and 24 AWG stranded UTP construction help minimise near-end crosstalk up to 550 MHz.

No software or extra accessories required

The cable ships as a single passive assembly with no drivers, configuration utilities or bundled adapters. Installation is completed by plugging each RJ-45 end into the target network ports. There are no firmware updates or licence keys to manage.

Highlights

  • Supports gigabit speeds up to 1000 Mbps with 550 MHz bandwidth
  • Gold-plated contacts resist corrosion for lasting signal integrity
  • Staggered-pin plug design minimizes near-end crosstalk
  • Molded strain relief protects connectors from damage during use
  • Flexible stranded 24 AWG construction suits tight routing spaces

Specifications

BrandTRIPP LITE
ModelN200-006-GY
TypeConsumer Electronics
CatRJ-45
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length6 ft
ColorGray
FeaturesCable Characteristic:Patch Cable
Features:Corrosion Resistant
Flexible
Minimized Near-End Crosstalk (NEXT)
Molded
Strain Relief
Stranded
Shipping weight0.09 kg
Package size187 × 152 × 13 mm

Questions about this item

How do I plug the 24 AWG stranded RJ-45 connectors into a router without damaging the latch?

Hold the connector by its molded boot, align the gold-plated contacts with the port, and press straight in until the latch clicks; forcing it at an angle bends the staggered pins.

When should I replace the cable if the gold-plated contacts start to oxidise?

The corrosion-resistant gold plating is designed for the life of the cable; replace it only if the latch breaks, the jacket cracks, or a tester shows NEXT failures.

At what bandwidth does signal loss become noticeable on a 6 ft run?

The cable is rated to 550 MHz for 1 Gbps Ethernet; loss on a six-foot patch lead is negligible within that rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.