We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat5e patch cable with molded RJ45 connectors, five feet long

Tripp Lite

Tripp Lite N002-005-BK 5 ft Cat5e network ethernet cable

SKU CH-1E04-XX08T MPN N002-005-BK

A 5 ft Cat5e patch cable with moulded RJ45 connectors rated for 350 MHz and 1 Gbps Ethernet

  • TypeEthernet Patch (RJ-45)
  • Cat5E
  • Length5 ft.
  • ColorBlack
  • FeaturesCabling for category 5 (Cat5) and 5e (Cat5e) applications Le
  • Supports 1 Gbps Ethernet with Cat5e 350 MHz rating
  • Molded connectors with integral strain relief protect the plug
  • 5 ft black cable fits short desk runs
  • PVC 4-pair stranded UTP meets IEEE 802.3ab and ANSI/EIA/TIA 568
  • Compatible with 10/100/1000Base-T, Token Ring and ATM networks

Cat5e patch cable for 1 Gbps networks

This five-foot Cat5e patch cable uses four-pair stranded UTP with moulded RJ45 connectors and integral strain relief. It is rated for 350 MHz bandwidth and supports 1000Base-T gigabit Ethernet alongside 10/100Base-T, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring applications.

Suitable for standard gigabit links.

The cable meets IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL category 5e draft 11 requirements. Builders needing 2.5 Gbps, 5 Gbps or 10 Gbps throughput, or Type 3 and Type 4 PoE power budgets, should select a Cat6 or higher specification instead.

350 MHz bandwidth enables 1 Gbps over 5 ft

The 350 MHz rating is the single figure that confirms the cable can carry gigabit Ethernet at this length. If the installation requires higher frequencies for multi-gigabit speeds, this Cat5e construction will not meet that need.

Highlights

  • Supports 1 Gbps Ethernet with Cat5e 350 MHz rating
  • Molded connectors with integral strain relief protect the plug
  • 5 ft black cable fits short desk runs
  • PVC 4-pair stranded UTP meets IEEE 802.3ab and ANSI/EIA/TIA 568
  • Compatible with 10/100/1000Base-T, Token Ring and ATM networks

Specifications

BrandTRIPP LITE
ModelN002-005-BK
TypeEthernet Patch (RJ-45)
Cat5E
Length5 ft.
ColorBlack
FeaturesCabling for category 5 (Cat5) and 5e (Cat5e) applications
Length: 5-ft. color: black connectors: RJ45 male
Feature molded connectors with integral strain relief
PVC 4-pair stranded UTP
Rated for 350MHz/ 1Gbps communication
Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 5e draft 11)
Available in other colors and lengths
Also available in a snagless design (N001 series) to protect the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.
Also available - Cat6 cables (N201 s
Shipping weight0.05 kg
Package size232 × 170 × 29 mm

Questions about this item

Does the 5 ft Cat5e cable generate any heat or noise when carrying 1 Gbps traffic continuously?

No. A passive copper patch cord has no active components, so it produces zero heat and no audible noise at any supported speed.

What devices must already have RJ45 ports for this cable to work?

Both ends need an RJ45 jack — typical examples are a router, switch, PC network card, NAS, IP camera or any 10/100/1000Base-T equipment.

Will this Cat5e patch cord work reliably with older 10 Mbps and 100 Mbps gear I still use?

Yes. The cable meets Cat5e specs and supports 10Base-T, 100Base-TX and 1000Base-T, so legacy 10/100 devices connect without configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.