We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black four foot Cat5e ethernet cable with moulded RJ45 connectors

Tripp Lite

Tripp Lite N002-004-BK 4 ft Cat5e 350MHz network ethernet cable

SKU CH-TPB9-BRDAA MPN N002-004-BK

A 4 ft Cat5e patch cable with moulded RJ45 connectors, rated for 350 MHz and 1 Gbps communication

  • TypeConsumer Electronics
  • Cat5/5E
  • Connector ARJ45
  • Connector BRJ45
  • Length4 ft.
  • ColorBlack
  • Supports gigabit speeds with 350 MHz bandwidth rating
  • Molded connectors with integral strain relief resist cable damage
  • Meets IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568 and ISO/IEC 11801 standards
  • Four-foot length suits short rack or desk connections
  • PVC 4-pair stranded UTP construction ensures flexible installation

4 ft Cat5e 350 MHz Patch Cable

This 4 ft Cat5e cable is built for standard gigabit Ethernet links in homes, offices or small-business networks. Molded RJ45 connectors on both ends include integral strain relief to protect the terminations during repeated moves. The stranded UTP construction stays flexible for routing around corners and through tight cable-management channels.

Suits short gigabit runs.

Installers who need a tidy connection between a switch, router or wall jack and a PC, printer or access point will find the 4 ft length convenient. Builders planning runs beyond the supplied length or requiring multi-gigabit throughput should select a higher-category cable instead.

Rated 350 MHz for 1 Gbps communication

The cable is tested to 350 MHz and rated for 1 Gbps data rates, meeting IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568 and ISO/IEC 11801 category 5e draft 11 requirements. This single bandwidth figure determines whether the link will support the intended gigabit application.

Highlights

  • Supports gigabit speeds with 350 MHz bandwidth rating
  • Molded connectors with integral strain relief resist cable damage
  • Meets IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568 and ISO/IEC 11801 standards
  • Four-foot length suits short rack or desk connections
  • PVC 4-pair stranded UTP construction ensures flexible installation

Specifications

BrandTRIPP LITE
ModelN002-004-BK
TypeConsumer Electronics
Cat5/5E
Connector ARJ45
Connector BRJ45
Length4 ft.
ColorBlack
FeaturesFeature molded connectors with integral strain relief
PVC 4-pair stranded UTP
Rated for 350MHz/ 1Gbps communication
Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 5e draft 11)
Also available in a Snagless design (N001-Series) to protect the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.
Shipping weight0.25 kg
Package size157 × 137 × 15 mm

Questions about this item

Will this 350MHz Cat5e cable work with my existing 1Gbps router and switch?

Yes, it is rated for 350MHz and 1Gbps communication, so it will operate at full speed with gigabit equipment while remaining compatible with slower ports.

How can I confirm the cable is performing correctly after installation?

Verify that the link lights on both ports show a 1Gbps connection and run a speed test to confirm throughput matches your network plan.

What comes in the box and do I need any extra connectors?

The box contains the 4 ft black Cat5e patch cable with molded RJ45 connectors on both ends; no additional connectors or tools are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.