We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey metal DIN-rail UPS with hardwire terminals and LED display

Tripp Lite

Tripp Lite DIN850AC 480W 24V DC DIN Rail UPS

SKU CH-FXAF-PFJXZ MPN DIN850AC

DIN-rail 24 V DC UPS delivers 480 W with hardwired input and output, three-minute standby and an LED status display

  • 480 W continuous power protects critical DC loads
  • 850 VA rating handles short-duration surge demands
  • 24 V DC input and output simplify industrial wiring
  • DIN-rail mount fits standard control cabinets
  • LED display shows status at a glance

Industrial DIN-Rail UPS for 24 V DC Systems

The Tripp Lite DIN850AC is a 480 W battery backup designed for 24 V DC industrial equipment. It accepts hardwired input and delivers hardwired output on a standard DIN rail. The unit suits automation panels, process controllers and remote sensors that must survive brief mains interruptions.

Hardwired Installation with LED Status

Installation requires permanent wiring to both the 24 V DC source and the protected load; no plug-and-play connectors are provided. The front LED display shows operating mode and battery condition at a glance. A common error is reversing the DC polarity on the terminal block, which prevents start-up and may damage the internal charger.

Three-Minute Buffer at Full Load

The UPS is rated for a 3 minute stand-by at the full 480 W, giving controls time to execute an orderly shutdown. Under lighter loads the reserve extends proportionally, but the battery is not sized for extended runtime. Continuous operation beyond the rated window will deplete the cells and require a full recharge cycle before the next event.

Highlights

  • 480 W continuous power protects critical DC loads
  • 850 VA rating handles short-duration surge demands
  • 24 V DC input and output simplify industrial wiring
  • DIN-rail mount fits standard control cabinets
  • LED display shows status at a glance

Specifications

BrandTRIPP LITE
Shipping weight6.35 kg
Package size399 × 191 × 191 mm

Questions about this item

How can I confirm the DIN850AC is providing backup power after wiring it to the 24 V DC bus?

The front LED display shows real-time status including input voltage, output voltage and battery condition so you can verify the unit is online and ready.

What ships with the DIN850AC and what must I supply for a hard-wired 24 V DC installation?

The UPS module itself is included; you must provide DIN rail mounting hardware, suitably rated DC cables, ferrules and an external 24 V DC battery pack for the 3 minute stand-by runtime.

Which capacity matches a 480 W load on a 24 V DC rail?

The DIN850AC is rated at 480 W continuous output at 24 V DC, making it the correct single model for that load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.