Tripp Lite
Tripp Lite B140-101X-U DVI over Cat5/6 extender kit 125 ft 1080p 60 Hz network antenna
Extends DVI video up to 125 feet over a single Cat5e/6 cable with 1080p at 60 Hz support
- TypeDVI-D ove Ethernet
- Max Extend Distance125 feet
- SpecificationsConnector A: DVI-D SINGLE LINK (MALE) Connector B: (2) RJ45
- FeaturesIdeal for digital signs, trade shows, presentations, classro
- Extends 1080p video up to 125 feet over Cat5e/6
- Single Cat5e/6 cable carries transmitter and receiver signals
- USB Micro-B port powers receiver without extra adapter
- Works with all operating systems for broad compatibility
- Built-in equalisation adjusts remote display image quality
DVI-D Single Link extension over Ethernet
The Tripp Lite B140-101X-U extends a DVI-D Single Link signal up to 125 feet using a single Cat5e or Cat6 cable. It supports resolutions up to 1920 x 1200 at 60 Hz, including 1080p. The kit includes a transmitter with a DVI-D male connector and a receiver with a DVI-I female connector. Power is supplied to the receiver via a USB Micro-B port.
Suited for fixed installs needing long cable runs
This kit suits digital signage, trade shows, classrooms, churches and retail displays where the source and display are far apart. It works with all operating systems and includes built-in equalisation for image adjustment. Buyers who need to extend dual-link DVI resolutions or require HDMI or DisplayPort interfaces should look at other solutions. The single-link DVI-D input limits maximum resolution to 1920 x 1200.
125-foot maximum distance over Cat5e/6
The critical specification is the 125-foot extension limit over a single Cat5e or Cat6 cable, with 24 AWG solid wire recommended for best results. This distance cap determines whether the kit reaches your display location. The transmitter and receiver connect via two RJ45 ports and the link carries the 1920 x 1200 at 60 Hz signal with HDCP support.
Highlights
- Extends 1080p video up to 125 feet over Cat5e/6
- Single Cat5e/6 cable carries transmitter and receiver signals
- USB Micro-B port powers receiver without extra adapter
- Works with all operating systems for broad compatibility
- Built-in equalisation adjusts remote display image quality
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | B140-101X-U |
| Type | DVI-D ove Ethernet |
| Max Extend Distance | 125 feet |
| Specifications | Connector A: DVI-D SINGLE LINK (MALE) Connector B: (2) RJ45 (FEMALE) Connector C: DVI-I (FEMALE) Ports: 1 |
| Features | Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings Extends a 1920 x 1200 (60 Hz) signal, including 1080p, up to 125 ft. Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series) Supports HDCP Built-in equalization control lets you adjust the image on the remote display |
| Shipping weight | 0.23 kg |
| Package size | 203 × 152 × 51 mm |
Questions about this item
Should I use Cat5e or Cat6 cable for the 125 ft run?
Use 24 AWG solid-wire Cat5e or Cat6 cable for best results over the full 125 ft distance.
Will my 1920 x 1200 display run at 60 Hz through this extender?
Yes, the kit supports 1920 x 1200 at 60 Hz, including 1080p, up to 125 ft.
How does the receiver get power without a separate adapter?
The receiver draws power from the transmitter through the USB Micro-B port over the Cat5e/6 link.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
