We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2U rack panel with 24 RJ45 ports in two rows of 12

Tripp Lite

Tripp Lite B110-SPPOEC-J12 12-port PoE++ surge protector

SKU CH-PQ55-Q1JNN MPN B110-SPPOEC-J12

In-line surge protector with twelve RJ-45 ports safeguards PoE++ devices from ESD and voltage spikes

  • Outletside A - Connector 1: (12) RJ45 (FEMALE); Side B - Connector
  • Protects 12 PoE devices with 2 kA surge rating
  • Rack-mountable 2U panel fits 19-inch cabinets
  • Silicon-avalanche diodes clamp spikes in under one nanosecond
  • Supports both mid-span and end-span PoE++ power
  • Meets IEC 61000-4-2 ESD standards at 8 kV and 15 kV

12-Port PoE++ In-Line Surge Protection

The Tripp Lite B110-SPPOEC-J12 is a 2U rack-mountable surge protector designed to safeguard Power over Ethernet equipment from electrostatic discharge and voltage spikes. It sits between an Ethernet switch and up to twelve PoE devices using Cat5e or Cat6 cables. Solid-state silicon-avalanche diode technology provides low clamping voltage and a response time under one nanosecond. Both mid-span and end-span PoE configurations are supported for flexible deployment.

Suits Installations Protecting Multiple PoE Devices

This unit fits administrators securing IP cameras, wireless access points, network switches or A/V equipment in a 19-inch rack environment. The twelve protected channels handle high-density runs without needing multiple smaller protectors. Buyers needing protection for non-PoE data lines or fibre connections cannot use this RJ45-only design. Installations requiring outdoor-rated enclosures or higher surge current ratings should look at alternative form factors.

2 kA Surge Rating With IEC 61000-4-2 Compliance

The protector handles a maximum surge current of 2 kA per line and meets IEC 61000-4-2 ESD standards at 8 kV contact and 15 kV air discharge. This specification determines whether the unit can absorb the transient energy expected in your environment. Verify that your cabling infrastructure uses RJ45 terminations and that the 2U rack space is available before purchase.

Highlights

  • Protects 12 PoE devices with 2 kA surge rating
  • Rack-mountable 2U panel fits 19-inch cabinets
  • Silicon-avalanche diodes clamp spikes in under one nanosecond
  • Supports both mid-span and end-span PoE++ power
  • Meets IEC 61000-4-2 ESD standards at 8 kV and 15 kV

Specifications

BrandEaton
Model110-SPPOEC-J12
Part Number110-SPPOEC-J12
Outletside A - Connector 1: (12) RJ45 (FEMALE); Side B - Connector 1: (12) RJ45 (FEMALE)
Shipping weight1.31 kg
Package size560 × 75 × 65 mm

Questions about this item

What type of network cables and rack space do I need to connect this 12-port surge protector?

Use Cat5e or Cat6 cables for the 12 RJ45 ports on each side; the unit fits a 19-inch rack and occupies 2U of height.

Will my existing non-PoE cameras or switches still pass data through the protector?

Yes, the RJ45 pass-through design carries Ethernet data regardless of PoE, so legacy devices without PoE remain connected and protected.

How can I verify the surge protector is actively guarding my 12 PoE++ lines after installation?

The solid-state silicon-avalanche diodes clamp transients in under one nanosecond and meet IEC 61000-4-2 ESD levels of 8kV contact and 15kV air discharge, confirming protection is live.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.