We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rack panel with five RJ-45 ports on each side

Tripp Lite

Tripp Lite B110-SPPOEC-A5 5-port RJ-45 in-line surge protector

SKU CH-VDKT-KBPWC MPN B110-SPPOEC-A5

In-line surge protector with five RJ-45 ports safeguards PoE devices from voltage spikes and ESD

  • OutletsSide A - Connector 1: (5) RJ45 (FEMALE); Side B - Connector
  • 1U in-line design protects up to five PoE devices
  • Silicon-avalanche diodes clamp surges in under one nanosecond
  • Meets IEC 61000-4-2 ESD standard at 15 kV
  • Supports both mid-span and end-span Power over Ethernet
  • TAA-compliant for GSA schedule purchases

In-Line PoE++ Surge Protector

The Tripp Lite B110-SPPOEC-A5 shields up to five Power over Ethernet devices such as IP cameras, wireless access points and network switches from electrostatic discharge and voltage spikes. It installs directly between the Ethernet source and connected equipment using Cat5e or Cat6 cables. The 1U rackmount panel fits standard 19-inch enclosures for tidy rear-cable routing. It is not suited for non-PoE networks or installations requiring more than five protected ports.

Solid-State Silicon-Avalanche Protection

Solid-state silicon-avalanche diode technology delivers a low clamping voltage and responds in under one nanosecond to transient events. The unit complies with IEC 61000-4-2 for ESD at 8 kV contact and 15 kV air discharge levels. Both mid-span and end-span PoE configurations are supported without interrupting data or power flow. No external power supply or cooling is required for normal operation.

TAA-Compliant Plug-and-Play Deployment

The protector ships ready for immediate use with no software, drivers or configuration needed. TAA compliance qualifies it for GSA Schedule procurement in federal and public-sector projects. The black metal housing provides durable grounding and physical shielding for the five RJ-45 pass-through ports. No additional mounting brackets, cables or management utilities are bundled.

Highlights

  • 1U in-line design protects up to five PoE devices
  • Silicon-avalanche diodes clamp surges in under one nanosecond
  • Meets IEC 61000-4-2 ESD standard at 15 kV
  • Supports both mid-span and end-span Power over Ethernet
  • TAA-compliant for GSA schedule purchases

Specifications

BrandTRIPP LITE
ModelB110-SPPOEC-A5
Part NumberB110-SPPOEC-A5
OutletsSide A - Connector 1: (5) RJ45 (FEMALE); Side B - Connector 1: (5) RJ45 (FEMALE)
Shipping weight0.77 kg
Package size559 × 104 × 79 mm

Questions about this item

How do I install the B110-SPPOEC-A5 in a 19-inch rack and what step is commonly missed?

Mount the 1U panel in the rear of the rack, then connect each PoE device to the five RJ-45 ports on Side A and the source switch to Side B using Cat5e or Cat6 cables; the missed step is verifying mid-span or end-span PoE mode matches your equipment.

What maintenance or replacement will the surge protector need after extended use?

The solid-state silicon-avalanche diodes degrade after absorbing repeated surges; replace the unit if the protection indicator fails or after a known major strike to maintain IEC 61000-4-2 compliance.

What limit appears first when the B110-SPPOEC-A5 handles sustained PoE++ loads?

The 2 kA surge-current rating is the first hard limit; continuous high-power PoE++ traffic can push components toward that threshold, so monitor total connected device draw.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.