We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black in-line PoE surge protector with two RJ-45 ports and DIN rail clip

Tripp Lite

Tripp Lite B110-SP-POEC-10 In-Line PoE Surge Protector 10 Gbps

SKU CH-BSKK-DMX7V

In-line surge protector shields 10 Gbps PoE++ devices up to 100 W with 2 kA clamping and DIN-rail mounting

  • Protects 10 Gbps PoE++ devices from surges with 2 kA rating
  • Supports IEEE 802.3 bt Type 4 delivering 100 W over Cat5e/6/6a
  • Powers cameras and wireless access points via PoE af 15 W at 30 W and bt 100 W
  • DIN rail mountable for industrial AV and smart building installs
  • TAA compliant for government procurement requirements

In-Line PoE++ Surge Protection for 10 Gbps Networks

The Tripp Lite B110-SP-POEC-10 installs between an Ethernet source and a powered device to guard against electrostatic discharge, power surges and cable discharge events. It supports 10 Gbps throughput and IEEE 802.3 bt Type 4 power delivery up to 100 W over Cat5e, Cat6 or Cat6a cabling. Designed for industrial AV, smart building and automation environments, it is DIN-rail mountable and TAA compliant.

Verify RJ-45 In-Line Compatibility

Confirm that the link uses Cat5e, Cat6 or Cat6a cable terminated with RJ-45 connectors on both sides of the protector. Ensure a suitable grounding location is available for the included ground wire before mounting the unit on a DIN rail. The device handles PoE, PoE+ and PoE++ power levels but does not convert non-PoE links to powered ones.

Ground Wire and DIN-Rail Clip Enable Immediate

The bundled ground wire provides the mandatory path to earth for surge dissipation without requiring a separate purchase. A DIN-rail mounting clip is integrated, allowing the protector to snap onto standard rails inside cabinets or enclosures. These included items mean the unit can be deployed in industrial settings as soon as it arrives.

Highlights

  • Protects 10 Gbps PoE++ devices from surges with 2 kA rating
  • Supports IEEE 802.3 bt Type 4 delivering 100 W over Cat5e/6/6a
  • Powers cameras and wireless access points via PoE af 15 W at 30 W and bt 100 W
  • DIN rail mountable for industrial AV and smart building installs
  • TAA compliant for government procurement requirements

Specifications

No published specifications for this item yet.

Questions about this item

Does the B110-SP-POEC-10 come with the grounding wire and Cat5e/6/6a patch cables, or must they be purchased separately?

The unit includes a grounding wire for DIN-rail installation; Cat5e, Cat6 or Cat6a Ethernet cables are not supplied and must be sourced separately.

Which PoE standard should I select for a device that draws up to 100 W — 802.3 af, 802.3 at or 802.3 bt Type 4?

Choose IEEE 802.3 bt Type 4, rated for 100 W; the protector also passes 802.3 af at 15 W and 802.3 at at 30 W for lower-power gear.

Will the 10 Gbps rating hold on a 45 m Cat6a run to a roof-mounted wireless access point?

Yes — the protector is specified for 10 Gbps throughput on Cat5e, Cat6 or Cat6a cabling, so a 45 m Cat6a link to a WAP remains at full line rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.