We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black network box with Ethernet ports and voltage selector

TRENDnet

TRENDnet TPE-104GS Gigabit PoE Splitter power splitter cord

SKU CH-4RN8-8KKNY

Splits a gigabit PoE signal into separate power and data sources with adjustable 5V, 9V or 12V output up to 100 meters

  • Weight0.4400
  • FeaturesPower a non-PoE device up to 100 meters (328 ft.) away Split
  • Powers non-PoE devices up to 100 meters (328 ft) away
  • Splits gigabit PoE into separate power and data sources
  • Adjustable output supports 5V, 9V, or 12V devices
  • Includes 2.0 and 2.5 mm jumper cable for compatibility
  • IEEE 802.3af PoE compatible for standard operation

Gigabit PoE Splitter for non-PoE devices

The TRENDnet TPE-104GS separates a Gigabit PoE connection into distinct power and data feeds. It enables a non-PoE device to operate up to 100 meters (328 ft) from the PoE source. A dip-switch selects 5V, 9V, or 12V output to match the attached hardware. The unit is IEEE 802.3af compatible and supports full-duplex Gigabit speeds.

Ideal for remote IP cameras or access points

Installers powering a non-PoE device at distance with a single Ethernet cable will find this splitter fits the task. It works with standard PoE switches or injectors and includes 2.0 mm and 2.5 mm jumper cables for broader device fit. Buyers whose equipment already accepts PoE natively do not need this converter.

Adjustable 5V, 9V, 12V output voltage

The selectable DC output is the specification that determines whether the splitter can power your specific non-PoE device. Verify the device’s required voltage before purchase. The splitter draws its power from the PoE link and delivers up to 12V via the chosen barrel connector.

Highlights

  • Powers non-PoE devices up to 100 meters (328 ft) away
  • Splits gigabit PoE into separate power and data sources
  • Adjustable output supports 5V, 9V, or 12V devices
  • Includes 2.0 and 2.5 mm jumper cable for compatibility
  • IEEE 802.3af PoE compatible for standard operation

Specifications

BrandTRENDnet
ModelTPE-104GS
Weight0.4400
FeaturesPower a non-PoE device up to 100 meters (328 ft.) away
Splits a gigabit PoE signal into separate power and gigabit data sources
Adjustable voltage output supports 5V, 9V, or 12V devices
Use this compact device with PoE switches or injectors
Save on installation and equipment cost
Full Duplex Gigabit speeds
IEEE 802.3af PoE compatible
NDAA compliant

Questions about this item

Will the dip-switch or jumper cable on the TPE-104GS need replacement after extended use?

The dip-switch sets output to 5V, 9V, or 12V and the included 2.0 mm and 2.5 mm jumper cable connects the device; both are passive components with no moving parts that wear out.

What limits the distance when running the TPE-104GS continuously from a PoE switch?

The splitter passes gigabit data and power up to 100 meters (328 ft) over the Ethernet cable, so cable length is the practical limit.

Does the TPE-104GS generate noticeable heat or fan noise when powered all day from an 802.3af source?

The unit has no fan and draws power only from the PoE link; it runs silently and produces minimal heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.