We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray USB-C to DC barrel jack cable, 6.6 ft, weatherproof, male-to-male connectors

Tpenod JLCB0035 USB-C to DC 20V 6.6ft waterproof cable

SKU CH-A30R-FQ586

A 6.6-foot weatherproof USB-C to DC cable with a built-in PD smart chip converts 100W or higher PD chargers and power banks into 20V 5A maximum output for Starlink Mini

  • Typetype
  • ColorGray
  • Length6 Feet
  • Connector Number1
  • Connector DetailCable
  • Terminal GenderMale to Male
  • PD smart chip converts USB-C to 20 V DC for Starlink Mini
  • Weatherproof construction and copper conductor survive outdoor use
  • 6 ft male-to-male cable reaches power bank or charger easily
  • Works with 100 W or higher PD sources that supply 20 V output
  • Compatible with 5.5 × 2.1 mm DC jack devices needing 20 V input

Starlink Mini USB-C to DC 20 V cable

This 6.6 ft weatherproof cable converts a USB-C Power Delivery source into a 20 V DC barrel output for the Starlink Mini. A built-in PD smart chip negotiates the required voltage so the terminal can run from a compatible power bank or wall adapter. The copper conductors and male-to-male terminals are rated for 20 V at up to 5 A.

Suits portable Starlink Mini setups.

Travellers and field workers who want to replace a bulky 110 V UPS with a pocket-sized PD power bank will find the cable convenient. It also powers Asus laptops, LED strips, amplifiers and robotics boards that accept a 5.5 × 2.1 mm 20 V jack. Buyers who need a permanent indoor installation fed from mains voltage should look at a dedicated AC power supply instead.

Requires a PD source that delivers 20 V at 100 W

The cable only functions when the attached USB-C charger or power bank explicitly supports 20 V output and can supply at least 100 W. Lower-voltage PD profiles such as 5 V or 9 V will not activate the conversion, and undersized sources will current-limit or shut down. Verify the 20 V capability of your PD device before purchase.

Highlights

  • PD smart chip converts USB-C to 20 V DC for Starlink Mini
  • Weatherproof construction and copper conductor survive outdoor use
  • 6 ft male-to-male cable reaches power bank or charger easily
  • Works with 100 W or higher PD sources that supply 20 V output
  • Compatible with 5.5 × 2.1 mm DC jack devices needing 20 V input

Specifications

BrandTpenod
ModelJLCB0035
Typetype
ColorGray
Length6 Feet
Connector Number1
Connector DetailCable
Terminal GenderMale to Male
Wire GaugeJLCB0035
SpecificationsCable, Type C, 20 volts, 6.6, feet, Male-to-Male, 1, JLCB0035
ShieldingWeatherproof
ConductorCopper Conductor
ConstructionWeatherproof
FeaturesCable, Type C, Male-to-Male, 20 volts, 6.6 feet
Disclaimernot_applicable, false

Questions about this item

What USB-C Power Delivery standard does this cable use to deliver 20V output?

It uses a built-in PD smart chip to negotiate 20V at up to 5A from a 100W or higher PD charger or power bank.

What is the barrel connector size and polarity for the DC end?

The DC plug measures 5.5mm outer diameter by 2.1mm inner diameter, wired for 20V centre-positive.

How do you connect it, and what is the common mistake?

Plug the USB-C end into a PD source that confirms 20V output, then attach the DC plug; the mistake is using a charger that only supplies 5V or 9V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.