We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black wall adapter with US plug and barrel output cable

TOLPOWDP 12V 2A DC Power Adapter

SKU CH-57Y8-F432V

Replacement 12 V 2 A DC adapter for compatible shiatsu neck and back massagers with US barrel plug

  • Type9 V
  • Changer TypeUSB C Charger
  • Specifications24 watts, 12 volts, 2 amps, 110 volts, DC, type_a_2pin_na, 0
  • Connector ADC
  • Connector BDC
  • Cable Jakcet TypePolycarbonate
  • Wide voltage input works worldwide 100-240V 50/60Hz
  • UL certified protection guards against overcharge short circuit and overheating
  • 12V 2A output matches original massager power requirements
  • PC flame-retardant housing resists heat and deformation
  • Pure copper wire reduces power loss for stable charging

Compatible Massager Power Supply

This 12V 2A DC adapter replaces the original charger for RESTECK, Nekteck, Boriwat, CuPiLo, Mo Cuishle, Snailax, Papillon and Mirakel shiatsu neck, shoulder, back and foot massagers. It delivers 24 watts through a standard US barrel plug and is built with pure copper conductors to reduce output loss. The unit suits owners who need a direct replacement for a lost or damaged massager power supply.

Thermal Safety and Input Range

UL certification confirms over-charge, short-circuit and over-temperature protection for stable operation. The adapter accepts 100-240 volt input at 50 or 60 Hz, so it works across regional mains voltages without a separate converter. Engineering-grade polycarbonate housing and flame-retardant materials resist heat and deformation during extended charging sessions.

Build Integration and Limitations

The corded design uses a male DC connector on both ends and measures 14.33in by 12.83in by 9.06in overall. It is intended only for 12V massagers whose input current does not exceed 2A; devices requiring higher amperage or a different voltage are not supported. No USB-C or alternative output interfaces are provided.

Highlights

  • Wide voltage input works worldwide 100-240V 50/60Hz
  • UL certified protection guards against overcharge short circuit and overheating
  • 12V 2A output matches original massager power requirements
  • PC flame-retardant housing resists heat and deformation
  • Pure copper wire reduces power loss for stable charging

Specifications

BrandDell
Type9 V
Changer TypeUSB C Charger
Specifications24 watts, 12 volts, 2 amps, 110 volts, DC, type_a_2pin_na, 0, Compatible with RESTECK, Nekteck, Boriwat, CuPiLo, Mo Cuishle, Snailax, Mirakel, Papillon Shiatsu Back Shoulder Neck and Foot Massager
Connector ADC
Connector BDC
Cable Jakcet TypePolycarbonate
Connector StyleMale
FeaturesCompatible with RESTECK, Nekteck, Boriwat, CuPiLo, Mo Cuishle, Snailax, Mirakel, Papillon Shiatsu Back Shoulder Neck and Foot Massager, DC, Corded Electric, 0, 24 watts
Dimensions14.33in W x 12.83in H x 9.06in D
Package Quantity1
Package Contents1
Disclaimer18 months, not_applicable

Questions about this item

How do I install the 12V 2A adapter with the US standard wall barrel plug and avoid the polarity mistake?

Plug the US standard wall barrel plug into a 100-240V 50/60Hz outlet, then connect the DC male tip to the massager's 12V input; the step people get wrong is reversing centre-positive polarity, so match the symbol on the massager before powering on.

What maintenance or replacement will the polycarbonate-jacketed cord and UL-certified adapter need later?

Inspect the polycarbonate jacket and strain relief every few months for cracks or heat deformation; replace the unit if the jacket splits, the plug pins loosen, or the UL-certified adapter shows discolouration or intermittent output.

What limit shows up first when the 12V 2A output runs a shiatsu massager continuously?

The 24-watt ceiling is reached first; if the massager tries to draw more than 2A the over-current protection trips, and sustained full-load operation can trigger the over-temperature shutdown built into the UL-certified design.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.