We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TINGLEY RUBBER CORP.

TINGLEY RUBBER CORP. C44129 Arc Flash Flame Resistant Rain Coat surveillance - industrial

SKU CH-N3FQ-V6QT7

Flame-resistant PVC rain coat with Arc-rated protection, ANSI Class 3 high-visibility orange, and sealed seams for liquid proofing

  • Arc-rated 11 cal/cm² ATPV protects against flash hazards
  • ANSI Class 3 high-visibility orange enhances low-light detection
  • Therm-O-Rad sealed seams deliver 100% liquid-proof barrier
  • Full-vented cape back with 10.5 oz fabric improves air circulation
  • Non-conductive hardware and D-ring access support fall-arrest systems

Arc-Flash Rain Coat for Industrial Workers

This new TINGLEY rubber coat meets ANSI Class 3 and Arc Flash PPE Category 2 with an ATPV rating of 11 cal/sq cm. The PVC construction uses Therm-O-Rad sealed seams for 100 percent liquid-proof protection. Non-conductive hardware and a stand-up collar add safety for electrical environments. High-visibility orange ensures workers are seen in low-light conditions.

Suits Electrical Crews Needing Full Arc Protection

The garment fits men who require overhead shoulder mobility and fall-protection D-ring access on the job. A full-vented cape back improves air circulation during long shifts. Hook-and-loop cuffs and a zipper closure allow quick adjustment. Buyers needing a lighter fabric weight than 10.5 oz or a different colour should look at something else.

ATPV 11 cal/sq cm Decides Arc Suitability

The 11 cal/sq cm rating places this coat in Arc Flash PPE Category 2 for incident-energy exposure. California Proposition 65 warns that the product contains a chemical known to cause cancer. Verify that your hazard assessment requires Category 2 before selecting this coat.

Highlights

  • Arc-rated 11 cal/cm² ATPV protects against flash hazards
  • ANSI Class 3 high-visibility orange enhances low-light detection
  • Therm-O-Rad sealed seams deliver 100% liquid-proof barrier
  • Full-vented cape back with 10.5 oz fabric improves air circulation
  • Non-conductive hardware and D-ring access support fall-arrest systems

Specifications

BrandTINGLEY

Questions about this item

How do I put on the C44129 rain coat and what step is often missed?

Close the zipper fully, then secure the hook-and-loop cuffs and stand-up collar; the D-ring access flap must be snapped shut or the fall-protection harness connection will be exposed.

What part of the coat will need replacement after repeated arc-flash exposure?

The PVC shell and Therm-O-Rad sealed seams degrade after repeated high-heat events; inspect for stiffness or seam separation and replace the garment when the 11 cal/sq cm ATPV rating can no longer be guaranteed.

What limits how long I can work in this coat during sustained heat?

The 10.5 oz fabric weight and full-vented cape back delay heat build-up, but the 11 cal/sq cm ATPV rating is the first limit reached under continuous arc-flash conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.