We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 19.7-inch cable with P-Tap and USB-C connectors

Tilta Technology Co.,Ltd

Tilta Technology Co.,Ltd 19.7" P-Tap to USB-C Power Cable for Nano II Follow Focus Motor

SKU CH-WM5A-VDTVB

A 19.7-inch P-Tap to USB-C cable delivers 14.8 VDC to power the Nano II Follow Focus Motor for improved torque with stiff lenses

  • Reliable power for Nano II motor via stable 14.8 VDC P-Tap connection
  • Seamless integration with dedicated P-Tap to USB-C design for Nano II only
  • Durable build withstands rigorous production use for consistent performance
  • Optimized 19.7 inch length provides ample reach while minimizing cable clutter
  • Increased motor torque from 14.8V supply improves control with stiff vintage lenses

19.7" P-Tap to USB-C Power Cable

The Tilta P-Tap to USB-C power cable delivers a stable 14.8 VDC supply to the Nucleus Nano II Wireless Follow Focus Motor. It connects a P-Tap power source directly to the motor's USB-C port for reliable operation during extended shoots. This cable is designed exclusively for the Nano II motor and is not compatible with the Nano II Hand Wheel or other USB-C devices.

Passive cable thermals and power draw

As a passive cable assembly, it generates no operational noise and draws negligible power beyond the 14.8 VDC transmission to the motor. The robust construction ensures consistent electrical performance without thermal throttling or signal degradation during normal use on set.

Replaces standard USB-C power for torque gains

This cable replaces a standard USB-C power source when higher torque is required for stiff vintage lenses or zoom lenses. The 14.8 VDC output improves motor torque compared to typical 5 V USB-C supplies, making the upgrade worthwhile whenever the standard source cannot drive the load reliably.

Highlights

  • Reliable power for Nano II motor via stable 14.8 VDC P-Tap connection
  • Seamless integration with dedicated P-Tap to USB-C design for Nano II only
  • Durable build withstands rigorous production use for consistent performance
  • Optimized 19.7 inch length provides ample reach while minimizing cable clutter
  • Increased motor torque from 14.8V supply improves control with stiff vintage lenses

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the P-Tap end to my battery and the USB-C end to the Nano II motor?

Plug the P-Tap connector into a 14.8 VDC P-Tap power source, then insert the USB-C plug into the Nano II Follow Focus Motor port; the 19.7 inch length lets you route the cable without strain.

What wear should I watch for on the connectors and cable jacket over time?

Inspect the P-Tap and USB-C pins for bending or oxidation, and check the 50 cm jacket for cuts or kinks after heavy use; replace the cable if the connectors no longer seat firmly.

At what point does voltage drop become noticeable during a long shoot?

The 19.7 inch run is sized to deliver a stable 14.8 VDC to the Nano II motor; sustained draws near the motor's peak torque will show the first voltage sag at the USB-C connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.