Thomasville Lighting LKT-HS-CGD-WW-4P-US Light Kit 4 Pack 3000k-3500k 400mAh
A four-pack of rechargeable LED puck lights with motion sensing up to 120° and 10ft, dimmable 3000k-3500k output, and magnetic or adhesive mounting
- Product nameLKT-HS-CGD - GLARESBOT
- featuresLED
- includedLED Puck Light, Instruction Manual, Metal Sheet, USB Wire
- careHome; not_water_resistant
- warranties1 year.
- weight0.19 kilograms
- Motion-activated illumination within 120° and 10ft range
- Adjustable 10%–100% brightness at 3000k–3500k warm white
- 400mAh battery lasts up to 30 days in sensor mode
- Magnetic mount or adhesive plates for tool-free installation
- Compact 7.62×3.3×2 cm puck lights weigh only .19 kg
Four-Pack Wireless Puck Lights
This Thomasville Lighting kit contains four rechargeable LED puck lights designed for indoor use. Each unit measures 7.62 by 3.3 by 2 centimetres and weighs 0.19 kilograms. The lights mount on supplied metal sheets using built-in magnets for a wire-free setup. A USB charging cable and instruction manual are included in the pack.
Suited for Dark Corners, Not Wet Areas
The warm white output of 3000k-3500k fits closets, drawers and under-cabinet spaces where a soft glow is preferred. Motion sensing activates automatically in low light and turns off after 30 seconds of inactivity. Buyers needing water-resistant fixtures or colour-changing options should consider a different product line.
400mAh Battery Sets Run-Time Expectations
A built-in 400mAh cell powers each light for up to 30 days in motion-sensing mode or 10 hours in constant-on mode at 0.2 watts. Recharging is via the provided USB wire at 5 volts. The capacity figure is the key spec to match against how often you can recharge the units.
Highlights
- Motion-activated illumination within 120° and 10ft range
- Adjustable 10%–100% brightness at 3000k–3500k warm white
- 400mAh battery lasts up to 30 days in sensor mode
- Magnetic mount or adhesive plates for tool-free installation
- Compact 7.62×3.3×2 cm puck lights weigh only .19 kg
Specifications
| Brand | Thomasville Lighting |
|---|---|
| Model | LKT-HS-CGD-WW-4P-US |
| Product name | LKT-HS-CGD - GLARESBOT |
| features | LED |
| included | LED Puck Light, Instruction Manual, Metal Sheet, USB Wire |
| care | Home; not_water_resistant |
| warranties | 1 year. |
| weight | 0.19 kilograms |
| description | LKT-HS-CGD, GLARESBOT, 1 year., Plastic+Aluminum+LED, LED, Battery Powered, LED Puck Light, 7.62 L x 3.3 W x 2 H centimeters |
| Part Number | LKT-HS-CGD-WW-4P-US |
| finish | White |
| glass | Clear Prismatic |
| size | 4-Pack Black |
| type of bulb | LED |
| voltage | 5 volts |
| electrical usage (watts) | 0.2 watts |
| installation | Surface Mount |
| usage | Indoor / Outdoor |
| style | Contemporary |
| material | Acrylic |
Questions about this item
Will the 400mAh puck lights run on the same 5-volt USB charger I use for older devices?
Yes, each light draws 0.2 watts at 5 volts, so any standard USB power source can recharge the built-in 400mAh battery.
How do I verify the motion sensor is detecting movement correctly after I mount the lights?
Walk within 10 feet and 120° of the unit in low light; the LED should activate instantly and turn off after 30 seconds of no motion.
Which mounting hardware and cables are included in the 4-pack box?
Four LED puck lights, one instruction manual, four adhesive metal sheets, and one USB charging cable are supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



