We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black aluminum U-channels with milky silicone diffuser, 3.28ft each, screw-in mounting

THMOOTHER 1707-DK-GJ Black Aluminum Cord Cover 10×3.3 ft

SKU CH-B9DA-3G2K2 MPN 1707-DK-GJ

A 32.8 ft black aluminum U-channel kit with continuous silicone diffuser for flush-mounted LED strips up to 12.4 mm wide

  • Product name1707-DK-GJ THMOOTHER
  • location/usageScrew-In
  • warranty2 years.
  • finishBlack
  • styleModern
  • materialAluminum
  • Pre-drilled countersunk holes enable flush mounting
  • Continuous milky silicone diffuser reduces glare and smooths hotspots
  • Aluminum channel cuts with hacksaw and cover with scissors for custom lengths
  • Fits LED strips up to 12.4mm wide including 2835, 5050, 5630 types
  • 10 channels 3.28ft each total 32.8ft plus 40 screws anchors and end caps

Low-Profile Black U-Channel Kit

The THMOOTHER 1707-DK-GJ is a 10-piece aluminum channel system for surface-mounted LED strip installations. Pre-drilled countersunk holes let the track sit flush against walls, cabinets or ceilings for a clean finish. A continuous milky silicone diffuser snaps in to reduce glare and smooth hotspots while shielding strips from dust and light moisture. The kit includes 32.8ft total channel length, 40 screws with anchors and end caps for a complete run.

Installers Wanting Flush Diffused Light

This suits DIYers and professionals who need a modern black track that hides LED dots and protects tape lights up to 12.4mm wide. It works with 2835, 5050 and 5630 single-colour, RGB, RGBW and addressable strips. Builders requiring waterproof-rated enclosures, recessed mounting profiles or channels for strips wider than .49in should look at other solutions.

12.4mm Maximum Strip Width

The single specification that decides fit is the 12.4mm (0.49in) inner width limit. Any tape light exceeding this dimension will not seat properly in the U-channel. Verify your strip width before purchase; the diffuser cover and end caps are sized for this channel profile only.

Highlights

  • Pre-drilled countersunk holes enable flush mounting
  • Continuous milky silicone diffuser reduces glare and smooths hotspots
  • Aluminum channel cuts with hacksaw and cover with scissors for custom lengths
  • Fits LED strips up to 12.4mm wide including 2835, 5050, 5630 types
  • 10 channels 3.28ft each total 32.8ft plus 40 screws anchors and end caps

Specifications

BrandTHMOOTHER
Model1707-DK-GJ
Product name1707-DK-GJ THMOOTHER
location/usageScrew-In
warranty2 years.
Part Number1707-DK-GJ
finishBlack
styleModern
materialAluminum
weight1.746 kilograms
description1707-DK-GJ, THMOOTHER, Aluminum, Black, Screw-In, 10X3.3FT, 32.8
featuresAluminum, Screw-In, Black, 10X3.3FT, THMOOTHER, 1707-DK-GJ
type1707-DK-GJ

Questions about this item

What does the 10-pack include and do I need to buy LED strips separately?

The box contains 10 black aluminum channels at 3.28ft each (32.8ft total), one 32.8ft continuous milky silicone cover, 40 screws with wall anchors, 10 end caps with holes and 10 without. LED strips are not included.

Which LED strip widths and types fit the 12.4mm channel?

The channel accepts tape lights up to 12.4mm (0.49 in) wide and works with most 2835, 5050 and 5630 single-color, RGB, RGBW and addressable strips.

How much linear coverage does the 32.8ft diffuser give once installed?

The continuous milky silicone cover runs the full 32.8ft length, diffusing light evenly along the entire run and reducing LED hotspots across all 10 channels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.