We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-finish brass compression fitting for 16 mm PETG tube, G1/4 thread

Thermaltake

Thermaltake CL-W092-CA00SL-A Pacific 16 mm OD G1/4 compression fitting diy cooling

SKU CH-2E8W-PVXC7 MPN CL-W092-CA00SL-A

Chrome G1/4 compression fitting connects 16 mm OD PETG tubing in custom loops

  • TypeFittings
  • FeaturesDimension: ?22 x 19.7 (H) (mm) Applicable: OD: 16 mm (5/8”)
  • Secure G1/4 thread fits standard water blocks
  • 16 mm OD matches common PETG tubing
  • Copper construction resists corrosion in loops
  • Compact 22 mm diameter suits tight builds
  • Light 22 g weight reduces loop strain

Pacific 16 mm G1/4 Compression Fitting

The Thermaltake Pacific CL-W092-CA00SL-A is a chrome-plated copper compression fitting designed for custom liquid-cooling loops. It connects PETG tubing with a 16 mm outer diameter to components using a standard G1/4 thread.

Suits builders running 16 mm OD PETG tubing

This fitting suits builders running 16 mm OD PETG tubing who need a secure, leak-tested connection. It does not suit loops using soft tubing, acrylic tubing or any other outer diameter.

16 mm OD PETG compatibility

The single specification that decides fit is the 16 mm outer-diameter PETG tubing requirement; only tubing matching that exact size will seal correctly in this compression fitting.

Highlights

  • Secure G1/4 thread fits standard water blocks
  • 16 mm OD matches common PETG tubing
  • Copper construction resists corrosion in loops
  • Compact 22 mm diameter suits tight builds
  • Light 22 g weight reduces loop strain

Specifications

BrandThermaltake
SeriesPacific
ModelCL-W092-CA00SL-A
TypeFittings
FeaturesDimension: ?22 x 19.7 (H) (mm)
Applicable: OD: 16 mm (5/8”)
Weight: 22 g
Material: CU
Screw Thread: G 1/4
Note: Connector To PETG Tube
Shipping weight0.03 kg
Package size70 × 36 × 29 mm

Questions about this item

What does the 16 mm outer-diameter rating mean when I install this fitting in my loop?

It matches PETG tubing with a 16 mm outside diameter, giving a secure seal when the compression ring is tightened.

What does the G 1/4 thread limit in a custom cooling build?

The G 1/4 thread fits standard water-block, radiator and reservoir ports, so the fitting cannot be used on components with different thread sizes.

What clearance do I need for the 22 mm diameter and 19.7 mm height?

The fitting body is 22 mm wide and 19.7 mm tall, so allow at least that much space around the port for the compression nut to seat fully.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.