Thermal Grizzly
Thermal Grizzly Minus Pad Advance 120x20x1.5mm 4-Pack
A four-pack of electrically non-conductive thermal pads measuring 120 by 20 by 1.5 mm for SSDs, GPUs and other electronics
- FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
- Non-conductive design protects sensitive electronics from shorts
- High compressibility fills gaps for better heat transfer
- Improved thermal conductivity cools SSDs and GPUs efficiently
- 120 x 20 x 1.5 mm pads fit a wide range of components
- Four-pack supplies enough material for multiple installations
Thermal Grizzly Minus Pad Advance 4-Pack
Electrically non-conductive thermal pads sized 120 x 20 x 1.5 mm in a four-piece pack. Designed for SSDs, GPU coolers, water blocks, voltage regulators and memory modules. The Advance series improves on the Basic line with higher thermal conductivity and greater compressibility. Suitable for builders who need reliable gap filling without electrical risk.
Sustained-load behaviour
High compressibility lets the pads maintain consistent contact across uneven surfaces during long sessions. Improved thermal conductivity moves heat away from components continuously rather than only in short bursts. The non-conductive material eliminates short-circuit risk even if the pad shifts under vibration. Performance stays stable as long as the mounting pressure remains unchanged.
Compatibility check
Verify that a 1.5 mm thickness matches the gap between your component and its heatsink or backplate. Confirm the 120 mm by 20 mm rectangle covers the target area or can be trimmed without leaving uncovered spots. Ensure the mounting hardware can supply enough pressure to compress the pad fully. Buyers needing thinner or thicker pads, different dimensions, or the highest conductivity tier should look elsewhere.
Highlights
- Non-conductive design protects sensitive electronics from shorts
- High compressibility fills gaps for better heat transfer
- Improved thermal conductivity cools SSDs and GPUs efficiently
- 120 x 20 x 1.5 mm pads fit a wide range of components
- Four-pack supplies enough material for multiple installations
Specifications
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-MP-A-120-20-15-4 |
| Part Number | TG-MP-A-120-20-15-4 |
| Features | Thermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio. |
Questions about this item
Does the 1.5 mm thickness compress much when I tighten the cooler on my GPU?
The Minus Pad Advance series is designed with higher compressibility than the Basic version, so the 1.5 mm pad will conform well to uneven surfaces when the mounting pressure is applied.
Do I need to buy thermal paste or a cleaning kit to use these pads on my SSD?
No paste is required; the pads are pre-cut to 120 x 20 mm and ready to place after you clean the component surface with isopropyl alcohol.
Will these black 120 x 20 mm pads fit the memory modules on my older graphics card?
They are sized for typical VRM and memory rows on modern GPUs; measure your card’s chip spacing first, as older designs sometimes use narrower or wider layouts.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
