Thermal Grizzly
Thermal Grizzly DeltaMate MF10 Extender Fitting 10mm G1/4 Matt Nickel
A precision-machined brass extension fitting with G1/4 male and female threads that adds 10 mm spacing for custom water-cooling loops
- FeaturesThe DeltaMate Extender MF10 Matt Nickel is a precision-machi
- Precision 10 mm spacing for tidy loop routing
- Brass construction resists corrosion in custom water cooling
- EPDM O-rings withstand ozone and UV exposure
- Matt nickel finish simplifies cleaning and looks premium
- Installs with an 8 mm hex key for secure fit
Precision Brass Extension for Custom Loops
The Thermal Grizzly DeltaMate MF10 is a 10 mm male-to-female G1/4 extender machined from solid brass with a matt nickel finish. It adds exact spacing between water-cooling ports and fittings so tubing runs stay clean and modular.
Simple Install with an 8 mm Hex Key
Each end carries an EPDM O-ring that resists ozone and UV, sealing reliably when hand-tightened then snugged with an 8 mm hex key. The uniform outer diameter matches other DeltaMate parts, so alignment stays straight. Over-tightening can damage the soft brass threads, so stop at firm resistance.
For Builders Who Need Fixed 10 mm Spacing
This extender suits loops where a precise 10 mm gap solves port clearance or aesthetic alignment. It does not rotate, so builders who need angular adjustment should pair it with a DeltaMate Rotary or choose a dedicated rotary fitting instead.
Highlights
- Precision 10 mm spacing for tidy loop routing
- Brass construction resists corrosion in custom water cooling
- EPDM O-rings withstand ozone and UV exposure
- Matt nickel finish simplifies cleaning and looks premium
- Installs with an 8 mm hex key for secure fit
Specifications
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-DM-FIT-0206 |
| Part Number | TG-DM-FIT-0206 |
| Features | The DeltaMate Extender MF10 Matt Nickel is a precision-machined brass extension fitting with male and female G1/4 threads, adding 10 mm of spacing and enabling clean, modular custom water cooling configurations. |
Questions about this item
How do I verify the 10 mm spacing is correct after installing the MF10 extender?
Measure the gap between the component port and the attached fitting; the extender adds 10 mm of spacing, so the total distance should increase by that amount when the MF10 is seated with its G1/4 threads fully engaged.
What comes in the box and do I need extra O-rings or tools?
The package includes the brass MF10 extender with pre-installed EPDM O-rings on both G1/4 threads; an 8 mm hex key is required for installation and is not supplied.
Should I choose the MF10 or a different DeltaMate extender length?
Select the MF10 when you need a fixed 10.5 mm increase between ports; other DeltaMate models provide different fixed lengths, so match the extender to the exact spacing your loop layout requires.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
