We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6.7 inch Molex 4 pin male to three female Y splitter cable

THE ORDINARY

THE ORDINARY Molex 4 Pin IDE Power Splitter 1 to 3 Y 6.7 inch

SKU CH-N0Q2-7AF8Z

Splits one Molex 4-pin power connector into three to run multiple IDE drives or optical devices from a single PSU output

  • FeaturesCompatible with all IDE hard drives or other devices (CD/DVD
  • Powers three IDE devices from one PSU connector
  • 7 inch cable reaches drives in standard cases
  • Male-to-triple-female Molex 4-pin layout
  • Supports hard drives and optical drives together
  • Single-rail split keeps wiring tidy

Molex 4-Pin IDE Power Splitter

This new Molex 4-pin IDE power splitter connects one male connector to three female connectors. It allows two or three IDE hard drives or optical drives to draw power from a single power supply interface. The cable measures 6.7 inches in length. It is a straightforward solution for adding legacy drives.

Suits legacy drive installations

Builders adding multiple IDE hard drives, CD-ROM or DVD-ROM drives to an older system will find this splitter useful. It is not for systems that lack a free Molex 4-pin male connector on the power supply. It is also not for users who need to power more than three devices from one lead.

6.7 inch cable length

The fixed 6.7 inch length determines how far the splitter can reach from the power supply to the drives. Measure the distance inside your case before ordering. If the routing path is longer, this cable will not reach the furthest device.

Highlights

  • Powers three IDE devices from one PSU connector
  • 7 inch cable reaches drives in standard cases
  • Male-to-triple-female Molex 4-pin layout
  • Supports hard drives and optical drives together
  • Single-rail split keeps wiring tidy

Specifications

FeaturesCompatible with all IDE hard drives or other devices (CD/DVD-ROM drives etc) Two or three devices can be connected at the same time through a single interface Connector 1: 1 pcs molex 4 pin male power connector Connector 2: 3 pcs molex 4 pin female power connector Please confirm whether the PSU meets the maximum power consumption of the increased device before use

Questions about this item

Will the three female Molex 4-pin connectors need any periodic replacement?

The connectors are passive components with no moving parts; they do not wear out under normal use and require no scheduled replacement.

What limits how many devices I can run simultaneously from this splitter?

The power supply must be able to deliver the combined maximum power draw of all connected IDE hard drives and optical drives.

Does the cable generate noticeable heat or noise when powering three drives all day?

It is a passive wire assembly with no active electronics, so it produces no noise and negligible heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.