We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black matte 120mm case fans with VortexPro blades and eight silicone vibration pads per fan

THE ORDINARY

THE ORDINARY Dark Night Series 120mm Case Fan 3 Pack

SKU CH-E2T3-9EJ2C

Three 120 mm fans deliver 42.67 CFM airflow at 22.93 dBA using hydraulic bearings

  • TypeCase Fan
  • Three-pack delivers 42.67 CFM airflow per fan
  • Hydraulic bearing rated for 40000 operating hours
  • Eight silicone pads cut vibration to 22.93 dBA
  • 1200 RPM speed balanced for cooling and safety
  • 12 mounting screws included for quick case installation

Three-Pack 120mm Case Fans

The Dark Night Series 120mm Case Fan 3 Pack supplies three 120mm cooling fans for desktop computer chassis. Each unit uses a hydraulic bearing rated for 40000 operating hours and spins at 1200 RPM with a 10 percent tolerance. The pack targets builders who want matched airflow across multiple intake or exhaust positions without mixing fan models.

Hydraulic Bearing and Vibration Pads

Eight soft silicone pads surround each frame to absorb vibration at speed, while the hydraulic bearing retains lubricant for extended service life. The fans connect via standard 12 VDC power headers; the supplier notes they do not support external fan controllers, so speed control depends on motherboard headers or BIOS settings. Mounting uses the included twelve screws in the usual 120mm hole pattern.

Airflow and Noise Limits

Maximum airflow reaches 42.67 CFM at the rated 1200 RPM, with peak noise measured at 22.93 dBA. The 120mm by 25mm frame fits standard mounting points, but the fixed 1200 RPM ceiling limits static pressure for dense radiator or filter stacks. Buyers needing variable speed curves or higher pressure for restrictive layouts should consider models with PWM control and higher RPM ranges.

Highlights

  • Three-pack delivers 42.67 CFM airflow per fan
  • Hydraulic bearing rated for 40000 operating hours
  • Eight silicone pads cut vibration to 22.93 dBA
  • 1200 RPM speed balanced for cooling and safety
  • 12 mounting screws included for quick case installation

Specifications

TypeCase Fan

Questions about this item

What connector does the 12 VDC fan use and what speed does it cap at?

It runs on a standard 12 VDC header and is rated for 1200 RPM with a ±10 % tolerance.

What are the exact dimensions and screw-hole spacing for the 120 mm frame?

Each fan measures 120 x 120 x 25 mm and includes twelve mounting screws for standard 120 mm hole patterns.

How do I install the three fans without triggering the controller warning?

Connect each fan directly to a motherboard or fan-hub header; the manual states not to use a separate controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.