We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex to four 3/4-pin fan adapter cable, 30 cm total length

THE ORDINARY

THE ORDINARY 4-Pin Molex to 4 x 3/4-Pin Fan Sleeved Adapter Cable

SKU CH-AWGR-G7H2M

Connects up to four 3-pin or 4-pin PWM case fans to a single Molex power connector with 30 cm black-sleeved cables

  • FeaturesPower Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With
  • Power four case fans from a single Molex connector
  • Compatible with both 3-pin and 4-pin PWM fan headers
  • Fans run at fixed 12 V Molex voltage
  • High-density black sleeving gives an all-black look
  • 30 cm total cable length using 24 AWG tinned copper wire

Molex to Quad Fan Adapter

This adapter cable connects a single 4-pin Molex power connector to four 3-pin or 4-pin PWM case fans. It solves the problem of insufficient motherboard fan headers or limited current capacity. The fans receive a fixed 12V supply from the Molex source, so speed control via PWM or voltage regulation is not possible. It is built for builders who need to run multiple fans from one power lead.

Installing the Splitter Cable

Installation is straightforward: plug the large 4-pin Molex end into a power supply lead and attach up to four fan connectors to the opposite ends. The black sleeved wiring uses 1007 24AWG tinned copper conductors with PVC insulation and an outer diameter of 1.4mm. The total cable length excluding connectors is 30cm, which may limit routing options in larger cases. No motherboard signal wire is present, so fan speed reporting and automatic control are unavailable.

Fixed Voltage Operation Limits

Because the adapter draws only the two power pins from the Molex connector, every attached fan runs continuously at the full 12V line voltage. This means 3-pin and 4-pin fans alike will spin at maximum speed with no thermal throttling or software adjustment. The assembly weighs 17 grams and is rated for 80°C operating temperature. It is not suited for builds that require variable fan curves or motherboard monitoring.

Highlights

  • Power four case fans from a single Molex connector
  • Compatible with both 3-pin and 4-pin PWM fan headers
  • Fans run at fixed 12 V Molex voltage
  • High-density black sleeving gives an all-black look
  • 30 cm total cable length using 24 AWG tinned copper wire

Specifications

FeaturesPower Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector Cable Is Compatible With Standard 3-Pin Fans As Well Fans Will Be Operated At The Fixed Molex Voltage Of 12V (Only 2 Pins In Connector Required) Quality High Density Black Sleeving For All Black Appearance;Total Cable Length (Excluding Connectors): 12"/30cm

Questions about this item

How can I confirm the adapter is powering all four fans correctly after connecting it?

The fans should spin at full speed because the Molex connector supplies a fixed 12V; check each fan visually or in BIOS to verify they are running.

What connectors and cables are included, and is anything else required?

The cable has one large 4-pin Molex plug on the power-supply end and four 4-pin fan headers on the other; no extra parts are needed.

Which version should I choose if my motherboard has both 3-pin and 4-pin fan headers?

This single adapter works with both 3-pin and 4-pin fans because each header accepts either connector type.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.