We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided Y-cable with one 4-pin female and three male connectors, 10 inches long, two pack

THE ORDINARY

THE ORDINARY 1007 4-pin to 3× fan splitter cable 10 in 2-pack

SKU CH-RXZJ-20SNZ MPN 1007

Connects three case fans to one motherboard header with a 10-inch sleeved 4-pin to triple 3/4-pin splitter in a two-pack

  • FeaturesThis cable is compatible with all 4 pin and 3 pin case fans
  • Connect three fans to one header with a 4-pin to 3-way splitter
  • Black braided sleeving protects wires and resists abrasion inside the case
  • 10-inch length reaches most fan mounting positions comfortably
  • 24 AWG tinned-copper conductors rated for 80 °C ensure reliable power delivery
  • Two-pack provides spare cables for multi-fan builds or future upgrades

4-pin to 3× fan splitter cable

The Ordinary 1007 is a 10-inch PWM fan splitter cable that connects three case fans to a single motherboard header. One end carries a 4-pin female connector while the other end provides one 4-pin and two 3-pin male connectors. Black braided sleeving protects the 24 AWG tinned copper conductors rated for 80 °C.

Builders adding multiple fans to one header

Suits anyone who needs to run three fans from a single 4-pin PWM header without buying a powered hub. Not for systems that require independent speed control per fan because all three connectors share the same PWM signal. Also unsuitable for headers with strict current limits that cannot support the combined draw of three fans.

Sustained load behaviour

The 11-strand 0.12 mm tinned copper conductors and PVC insulation rated to 80 °C handle continuous current from three fans without overheating. Braided sleeving resists abrasion inside crowded cases during long-term operation. Voltage drop across the 10-inch length remains minimal so fan speeds stay stable under constant load.

Highlights

  • Connect three fans to one header with a 4-pin to 3-way splitter
  • Black braided sleeving protects wires and resists abrasion inside the case
  • 10-inch length reaches most fan mounting positions comfortably
  • 24 AWG tinned-copper conductors rated for 80 °C ensure reliable power delivery
  • Two-pack provides spare cables for multi-fan builds or future upgrades

Specifications

FeaturesThis cable is compatible with all 4 pin and 3 pin case fans !!! Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 3 Male Connectors at The Other End ( 1 of them is 4pin ,2 of them is 3pin ) The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case

Questions about this item

What motherboard header is required to connect the 4-pin female end of this splitter?

A standard 4-pin PWM fan header on the motherboard is required to power the splitter and all attached fans.

Will the two 3-pin male connectors still run fans if my older case fans only have 3-pin plugs?

Yes, the splitter provides one 4-pin and two 3-pin male connectors, so 3-pin fans connect directly and receive voltage-controlled speed.

How can I confirm the splitter is delivering power to all three fans after installation?

Power on the system and verify each connected fan spins; the motherboard fan-speed readout should report RPM for the fan attached to the 4-pin branch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.