Tenmory WiFi 6E Tri-Band Antenna Kit MHF4 10in Cable Bracket
Tri-band WiFi 6E antennas with 10-inch MHF4 cables and case brackets for 6 GHz, 5 GHz and 2.4 GHz coverage up to 15 metres
- TypeWiFi 6E
- ColorBlack
- SpecificationsWiFi 6E
- FeaturesWiFi 6E
- Tri-band 2.4, 5.8, 6 GHz support for wider device compatibility
- WiFi 6E ready for higher throughput on the 6 GHz band
- Stable link up to 15 metres from the router
- 10 inch MHF4 extension cable eases internal routing
- Two bracket sizes 4.7 and 3.15 inch fit most case slots
Tri-Band WiFi 6E Antenna Kit
This antenna kit supports the WiFi 6E standard across 6 GHz, 5 GHz and 2.4 GHz bands. It is designed for desktop PCs that use an internal MHF4 wireless module and need external antennas. The kit includes two dual-band antennas, a 10-inch low-loss coaxial extension cable with U.FL MHF4 connectors, and two case brackets for rear mounting. Buyers with MHF1 modules cannot use the supplied cable.
Capacity and Range
Each antenna provides 8 dBi gain and is rated for stable connections up to 15 meters from the router. The 10-inch (25 cm) extension cable allows flexible antenna placement behind the case. The larger bracket measures 12 cm (4.7 in) and the smaller 8 cm (3.15 in) to fit different slot heights. Signal loss will increase if a longer cable run is required beyond the supplied length.
MHF4 Connector Compatibility
The cable terminates in U.FL MHF4 plugs that mate only with MHF4 sockets on the wireless card. Systems equipped with MHF1 sockets will not connect without an adapter, which is not included. Verify the module connector type before purchase.
Highlights
- Tri-band 2.4, 5.8, 6 GHz support for wider device compatibility
- WiFi 6E ready for higher throughput on the 6 GHz band
- Stable link up to 15 metres from the router
- 10 inch MHF4 extension cable eases internal routing
- Two bracket sizes 4.7 and 3.15 inch fit most case slots
Specifications
| Brand | Tenmory |
|---|---|
| Type | WiFi 6E |
| Color | Black |
| Specifications | WiFi 6E |
| Features | WiFi 6E |
Questions about this item
Will the 16 cm RP-SMA antennas connect to an older card that uses MHF1 internal connectors?
Yes, the kit includes 10 inch MHF4 cables; you would need a separate MHF1 pigtail to match the older card.
How can I verify the 8 dBi tri-band antennas are performing correctly after installation?
Check that your WiFi 6E adapter shows 6 GHz, 5 GHz and 2.4 GHz bands with signal strength near the 15 meter range spec.
Does the package include both the 12 cm and 8 cm case brackets along with the 10 inch MHF4 cables?
Yes, the box contains two antennas, two 10 inch MHF4 to RP-SMA cables, one 12 cm bracket and one 8 cm bracket.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
