Telemecanique Sensors
Telemecanique Sensors XZCP1241L5 cordset 16.4 ft 4-pin M12 right-angle 250VAC/300VDC
A 16.4 ft 4-pin M12 right-angle cordset with bare-wire termination, PUR jacket, IP65/IP67 rating and 3 A capacity at 250 VAC/300 VDC
- Right-angle M12 connector fits tight spaces
- 4 ft PUR-jacketed cable resists oil and abrasion
- IP65 and IP67 rating seals out dust and water
- 4-pin 18 AWG conductors carry up to 3 A
- CSA, IEC and UL listed for 250 VAC / 300 VDC
Industrial M12 cordset for sensor wiring
The Telemecanique Sensors XZCP1241L5 is a 16.4 ft cordset with a 4-pin M12 right-angle female connector on one end and bare wires on the other. It suits automation technicians wiring proximity sensors, limit switches or I/O modules inside panels and on machines. The PUR jacket resists oil and abrasion in industrial environments.
Rated 3 A at 250 VAC or 300 VDC with 18 AWG
The cable carries up to 3 A within a temperature range of -13 °F to 176 °F. IP65 and IP67 ratings protect the M12 connection against dust and temporary immersion. The right-angle orientation eases routing in tight cable trays but the fixed 5 m length cannot be shortened without re-terminating the bare-wire end.
Replaces damaged or undersized M12 patch cables
Installers swap out cracked PVC leads or too-short factory cords with this UL Listed, CSA Certified, IEC-compliant assembly. The jump is worth it when a sealed IP67 connection and oil-resistant PUR jacket are required for continuous flexing or wash-down zones. Buyers needing a male M12 plug, a different pin count or a double-ended cordset must select another part.
Highlights
- Right-angle M12 connector fits tight spaces
- 4 ft PUR-jacketed cable resists oil and abrasion
- IP65 and IP67 rating seals out dust and water
- 4-pin 18 AWG conductors carry up to 3 A
- CSA, IEC and UL listed for 250 VAC / 300 VDC
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Which cordset length and pin count suit my sensor?
This cordset is 16.4 ft long with a 4-pin M12 right-angle connector on one end and bare wires on the other, rated 3 A at 250 VAC or 300 VDC.
What does the 3 A rating mean when the cordset is installed?
The 3 A limit applies continuously at up to 176 °F ambient; the 18 AWG PUR-jacketed cable and IP65/IP67 moulding maintain that capacity in wet or oily conditions.
How do the M12 right-angle connector and bare-wire end work with my panel?
The right-angle M12 female threads onto a standard M12 sensor port, while the bare-wire end terminates directly to terminal blocks or PLC I/O modules.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
