Telemecanique Sensors
Telemecanique Sensors XCKP2127N12 limit switch plunger roller lever 1NC/1NO 10A 240V
Top-mounted plunger with roller lever provides 1NC/1NO switching at 10A, 240V AC/DC in a NEMA 1, 2, 4, 6, 12, 13 miniature body
- 10 A switching at 240 V AC or DC handles heavy control circuits
- 1NC/1NO contact form gives both break and make functions in one unit
- Miniature body only 2.56 in high fits tight machine frames
- NEMA 1, 2, 4, 6, 12, 13 ratings suit indoor, outdoor and wash-down areas
- Roller lever with .87 in actuation length reduces wear on moving parts
Industrial limit switch for position sensing
The Telemecanique Sensors XCKP2127N12 is a miniature limit switch with a top-mounted plunger and roller lever actuator. It provides one normally closed and one normally open contact rated at 10A for both AC and DC circuits at 240V. NEMA 1, 2, 4, 6, 12 and 13 ratings suit indoor and outdoor industrial environments.
Replaces worn switches in safety
This unit upgrades older switches that lack the combined NEMA ratings or the 1NC/1NO contact form. The jump is worth it when a machine requires a sealed, miniature body with a 0.87 in actuator length and reliable switching at 10A across both current types.
Maintains contact integrity under continuous duty
The switch body measures 2.56 in high, 1.22 in wide and 1.18 in deep, housing contacts rated for sustained 10A loads at 240V. The roller lever reduces actuator wear during repeated operation, while the NEMA 4 and 6 ratings confirm the enclosure resists water ingress during prolonged exposure.
Highlights
- 10 A switching at 240 V AC or DC handles heavy control circuits
- 1NC/1NO contact form gives both break and make functions in one unit
- Miniature body only 2.56 in high fits tight machine frames
- NEMA 1, 2, 4, 6, 12, 13 ratings suit indoor, outdoor and wash-down areas
- Roller lever with .87 in actuation length reduces wear on moving parts
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What mounting footprint does the 1.22 in by 1.18 in body require?
The miniature body measures 1.22 in wide by 1.18 in deep, so the mounting surface must accommodate that footprint and the 2.56 in overall height.
How is the roller-lever plunger wired, and what mistake should be avoided?
Wire the 1NC/1NO contacts to the 10 A, 240 V AC or DC circuit; the common error is reversing the normally-open and normally-closed leads.
When should the roller lever be inspected or replaced?
Inspect the 0.87 in roller lever regularly for wear or debris; replace it if the roller no longer rotates freely or shows visible damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
