Telemecanique Sensors
Telemecanique Sensors XCKP2102N12 limit switch plunger roller 1NC/1NO 10A 240V
A top-mounted roller plunger limit switch with 1NC/1NO contacts rated 10 A at 240 V and NEMA 1, 2, 4, 6, 12, 13 enclosure protection
- Reliable switching with 1NC/1NO contacts rated 10A at 240V
- Compact miniature body fits tight spaces at 2.56in high by 1.22in wide
- Roller plunger actuator reduces wear with .8in engagement length
- NEMA 1 2 4 6 12 13 rating protects against dust water and oil
- Top-mounted actuator simplifies installation and alignment on machinery
Industrial limit switch for machine control
The Telemecanique Sensors XCKP2102N12 is a miniature limit switch with a top-mounted plunger and roller actuator. It provides one normally closed and one normally open contact rated at 10A for both AC and DC circuits at 240V. The unit suits automated machinery requiring precise position detection in a compact body.
Verify voltage, current and mounting space
Confirm that the control circuit operates at or below 240V and draws no more than 10A through the contacts. The switch body measures 2.56 in high, 1.22 in wide and 1.18 in deep with an actuator length of .8 in. Ensure the mounting pattern matches the miniature frame and that the NEMA 1, 2, 4, 6, 12, 13 ratings satisfy the enclosure environment.
Low heat, silent operation, minimal draw
As a purely electromechanical device the switch generates negligible heat and produces no audible noise during normal actuation. Power consumption is limited to the control circuit load it carries, so the component itself adds no measurable draw to the system.
Highlights
- Reliable switching with 1NC/1NO contacts rated 10A at 240V
- Compact miniature body fits tight spaces at 2.56in high by 1.22in wide
- Roller plunger actuator reduces wear with .8in engagement length
- NEMA 1 2 4 6 12 13 rating protects against dust water and oil
- Top-mounted actuator simplifies installation and alignment on machinery
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What comes in the box with the XCKP2102N12 limit switch?
The XCKP2102N12 limit switch unit is supplied as a single component; mounting hardware and wiring connectors are not included and must be sourced separately.
Which actuator style should I choose for a sliding gate application?
The roller plunger actuator suits sliding or lateral motion, reducing friction and wear compared to a plain plunger when the target moves across the switch head.
How does the 10 A 240 V rating apply when wiring this switch into a 240 V AC control circuit?
The 10 A 240 V AC rating means the 1NC/1NO contacts can safely switch resistive loads up to 10 amps at 240 volts AC in a properly fused control circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
