Telemecanique Sensors
Telemecanique Sensors XCKM115H7 limit switch roller lever rotary 1NC/1NO 10A 240V
Miniature rotary limit switch with roller lever, 1NC/1NO contacts rated 10 A at 240 V, NEMA 1, 2, 4, 12, 13
- Reliable position sensing with roller lever rotary actuator
- Handles up to 10 A at 240 V AC or DC
- Versatile 1NC/1NO contact form suits diverse circuits
- Compact miniature body fits tight machine spaces
- Protected by NEMA 1, 2, 4, 12, 13 enclosure ratings
Compact limit switch for machine safety
The Telemecanique Sensors XCKM115H7 is a miniature rotary limit switch with a roller lever actuator. It provides one normally closed and one normally open contact rated at 10 amps for both 240 volt AC and DC circuits. The side-mounted actuator suits machine guarding and position sensing in industrial equipment.
Suits tight enclosures needing side actuation
This switch fits builders who need a small body measuring 2.48 inches high, 2.52 inches wide and 1.18 inches deep with a 1.36 inch lever. It meets NEMA 1, 2, 4, 12 and 13 ratings for indoor and outdoor protection. Buyers who require a boot-sealed actuator or a different contact configuration should look at other models.
Stable contacts through repeated cycles
The roller lever reduces friction during actuation, helping the silver-alloy contacts maintain consistent resistance over long production runs. Rated for 10 amps continuous at 240 volts, the switch handles sustained loads without the derating that can affect snap-action types in high-cycle applications.
Highlights
- Reliable position sensing with roller lever rotary actuator
- Handles up to 10 A at 240 V AC or DC
- Versatile 1NC/1NO contact form suits diverse circuits
- Compact miniature body fits tight machine spaces
- Protected by NEMA 1, 2, 4, 12, 13 enclosure ratings
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What voltage supply and mounting space do I need for the XCKM115H7 limit switch?
The switch is rated for 240 V AC or DC at 10 A. Its body measures 2.48 in high, 2.52 in wide and 1.18 in deep, so allow at least that footprint plus clearance for the 1.36 in roller lever.
Will the 1NC/1NO contacts on this switch work with my existing 240 V control relays?
Yes. The XCKM115H7 provides one normally-closed and one normally-open contact, both rated 10 A at 240 V AC or DC, matching standard relay coils and contactors at that voltage.
How can I verify the switch operates correctly after wiring it?
Manually rotate the roller lever through its travel; you should hear and feel a distinct click as the 1NC contact opens and the 1NO contact closes, and a multimeter across each contact pair will show the expected continuity change.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
