Telemecanique Sensors
Telemecanique Sensors XCKM102H7 Limit Switch Plunger Roller 1NC/1NO 10A 240V
Miniature limit switch with roller plunger, 1NC/1NO contacts rated 10 A at 240 V, NEMA 1, 2, 4, 12, 13
- 1NC/1NO contacts handle forward and reverse signals
- 10 A at 240 V AC or DC for heavy loads
- Miniature body fits tight machine frames
- NEMA 1, 2, 4, 12, 13 seals out dust and water
- Top roller plunger gives smooth 1.71 in actuation
Industrial limit switch for machine safety
The Telemecanique Sensors XCKM102H7 is a miniature limit switch with a top-mounted plunger roller actuator. It suits automated machinery, conveyor systems and safety interlocks where a compact, snap-action contact is required. The NEMA 1, 2, 4, 12 and 13 ratings allow installation in indoor, outdoor and wash-down environments. It is not for applications needing a lever arm, whisker or non-contact sensing method.
Snap-action 1NC/1NO contacts rated 10 A at 240 V
The single specification that decides fit is the contact form: one normally closed and one normally open circuit sharing a single plunger action. Both AC and DC ratings are 10 A at 240 V, so the same switch handles control-circuit voltages up to that level. Builders who need multiple poles, higher current or a different voltage class must select another device.
Roller plunger reduces wear and eases alignment
The 1.71 in roller actuator converts lateral cam motion into a clean vertical stroke, lowering friction compared with a plain plunger. The miniature body measures 2.48 in high, 2.52 in wide and 1.18 in deep, fitting tight panels without a boot seal. Installers who need a sealed actuator or a larger mounting footprint will not find those features here.
Highlights
- 1NC/1NO contacts handle forward and reverse signals
- 10 A at 240 V AC or DC for heavy loads
- Miniature body fits tight machine frames
- NEMA 1, 2, 4, 12, 13 seals out dust and water
- Top roller plunger gives smooth 1.71 in actuation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What does the 10 A at 240 V rating mean when the switch is wired into a control circuit?
The contacts can safely carry up to 10 amperes at 240 volts AC or DC, so the switch can directly pilot contactors, solenoids or small motors without an intermediate relay.
Which NEMA enclosure ratings does the XCKM102H7 meet and what do they protect against?
It meets NEMA 1, 2, 4, 12 and 13, giving protection from falling dirt, dripping and light splashing water, windblown dust, oil and coolant seepage.
Will the 1.71 in roller plunger and 2.48 in by 2.52 in by 1.18 in body fit my existing mounting holes?
The roller plunger extends 1.71 inches from the top; the miniature body measures 2.48 inches high, 2.52 inches wide and 1.18 inches deep — check those dimensions against your bracket pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
