Telemecanique Sensors
Telemecanique Sensors M12 4-pin cordset 16.4 ft gray 250VAC/300VDC
Connects M12 4-pin sensors with a 16.4 ft PVC cable rated for 250 VAC and 300 VDC
- M12 4-pin female connector for quick sensor hookup
- 4 ft PVC-jacketed cable reaches distant devices
- 3 A 22 AWG conductors handle control-circuit loads
- IP65 IP67 rating seals out dust and water jets
- CSA IEC UL listed for compliant panel builds
M12 4-pin cordset for sensor wiring
This 16.4 ft gray cordset connects M12 female straight connectors to bare wire ends for industrial sensor and actuator circuits. It carries up to 3 A at 250 VAC or 300 VDC using 22 AWG conductors inside a PVC jacket rated IP65 and IP67. The cable operates from -13 °F to 176 °F and meets CSA, IEC and UL listings.
Verify connector gender
Ensure the mating device uses an M12 male 4-pin interface with straight orientation. Confirm the system voltage does not exceed 250 VAC or 300 VDC and that current draw stays within 3 A. Check that the operating temperature range and PVC jacket suit the installation environment. The bare wire end requires termination compatible with your terminal blocks or splices.
Replaces worn or shorter M12 4-pin cables
Use this cordset when a longer 5 m run is needed or when the original cable jacket shows cracking, moisture ingress or connector damage. The upgrade is worth it if the application demands IP67 sealing, a wider temperature span or certified compliance with CSA, IEC and UL standards that the old cable lacks. Not for applications requiring shielded cable, different pin counts or right-angle connector orientation.
Highlights
- M12 4-pin female connector for quick sensor hookup
- 4 ft PVC-jacketed cable reaches distant devices
- 3 A 22 AWG conductors handle control-circuit loads
- IP65 IP67 rating seals out dust and water jets
- CSA IEC UL listed for compliant panel builds
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What comes in the box and do I need to buy anything else to connect it?
The cordset ships as a single 16.4 ft cable with an M12 female connector on one end and bare wires on the other; no extra parts are required for basic wiring.
How do I choose between the available versions or lengths?
This model XZCPV1141L5 is offered in a 16.4 ft length with a 4-pin M12 straight connector and gray PVC jacket; select it when that exact length and pin count match your sensor.
What does the 250 VAC / 300 VDC rating mean when the cordset is installed?
It indicates the maximum voltage the cable insulation and connectors are rated to handle continuously in a 3 A circuit, with IP65/IP67 sealing and an operating range of -13 °F to 176 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
