We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black RJ45 splitter with two output ports and USB-C power cable

TelDaykemei

TelDaykemei RJ45 Splitter 1 to 2 Gigabit 1000Mbps network connector

SKU CH-NSSQ-TD9X9

An RJ45 splitter that turns one Gigabit port into two, supporting up to 1000Mbps over 100 metres with a USB-C power cable included

  • Changer Type1 TO 2
  • Connector StyleRJ45
  • One port becomes two RJ45 sockets for dual-device connectivity
  • Gigabit-class throughput up to 1000 Mbps theoretical maximum
  • Powered via included USB Type-C cable for stable operation
  • Supports cable runs up to 100 metres theoretical distance
  • Low 300 mA maximum current draw keeps energy use minimal

TelDaykemei RJ45 Splitter 1 to 2

This TelDaykemei adapter splits a single RJ45 network port into two RJ45 connections for PC, TV box or router sharing. It requires the included USB Type-C power cable to operate. The device provides a simple way to connect two wired devices where only one wall port or switch port is available.

Gigabit 1000Mbps theoretical rate

The splitter supports a theoretical maximum transmission rate of 1000Mbps over distances up to 100 metres. It draws up to 300mA at 5V maximum from the USB power source. Bandwidth is shared between the two output ports, so simultaneous heavy traffic on both links will reduce per-device throughput below the headline figure.

Upgrades a single port without running new cabling

This unit replaces the need for a second wall drop or a larger switch when only one cable run exists. It is not suited for buyers who need more than two additional ports or who require full dedicated bandwidth on each connection simultaneously. The jump is worthwhile when a powered splitter solves the immediate cabling constraint.

Highlights

  • One port becomes two RJ45 sockets for dual-device connectivity
  • Gigabit-class throughput up to 1000 Mbps theoretical maximum
  • Powered via included USB Type-C cable for stable operation
  • Supports cable runs up to 100 metres theoretical distance
  • Low 300 mA maximum current draw keeps energy use minimal

Specifications

BrandTelDaykemei
Changer Type1 TO 2
Connector StyleRJ45

Questions about this item

Will the 1000Mbps splitter work with my older 100Mbps router and PC?

Yes, the RJ45 ports are backwards compatible so a 100Mbps router or PC will connect, but each link will run at its own maximum of 100Mbps rather than the splitter's 1000Mbps ceiling.

How can I confirm the splitter is delivering the full 1000Mbps after I plug it in?

Connect two gigabit-capable devices, ensure the USB Type-C power cable is attached, then run a local speed test between them; sustained throughput near 1000Mbps shows the adapter is operating at its rated maximum.

Does the package include the USB Type-C power cable or must I buy it separately?

The box contains the RJ45 splitter and one USB Type-C power cable, so no separate power accessory is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.