We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short two-tone adapter cable with SATA 15-pin male and PCIe 6-pin male connectors

TeKit

TeKit SATA 15Pin to 6Pin PCI-Express Power Adapter Cable 2-Tone 0.8 ft 18 AWG 80W

SKU CH-3YE1-J7P1P

Converts a SATA power connector to a 6-pin PCIe plug for low-power graphics cards, using 18 AWG copper wire rated at 80W over .8 ft

  • TypeSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
  • Color2-Tone
  • Length< 1"
  • Connector Number2
  • Connector DetailSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
  • Terminal GenderFemale to Male
  • Converts SATA power to 6-pin PCIe for GPU use
  • 15-pin SATA male plugs into PSU spare connector
  • 6-pin PCIe female fits graphics card power input
  • 18 AWG copper conductors rated for 80W delivery
  • .8 ft length keeps cable routing tidy in case

Power adapter for low-draw GPUs

This 0.8 ft cable converts a single 15-pin SATA power connector into a 6-pin PCIe plug, letting a spare SATA lead from the PSU feed a graphics card rated up to 80 W. It suits builders who need one extra PCIe power connection without replacing the power supply.

Replaces missing PCIe lead on older PSUs

When a power supply lacks native 6-pin PCIe outputs but has an unused SATA connector, this adapter bridges the gap for cards that stay within the 80 W limit. The jump is worth it only for low-power GPUs that do not demand more current than the SATA rail can safely deliver.

Behaviour under sustained load

Copper conductors at 18 AWG carry continuous current up to the 80 W rating without overheating, provided the PSU's SATA rail is not already heavily loaded. Keyed male SATA and latched female PCIe ends resist accidental disconnection during extended gaming or compute sessions.

Highlights

  • Converts SATA power to 6-pin PCIe for GPU use
  • 15-pin SATA male plugs into PSU spare connector
  • 6-pin PCIe female fits graphics card power input
  • 18 AWG copper conductors rated for 80W delivery
  • .8 ft length keeps cable routing tidy in case

Specifications

BrandTekit
TypeSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
Color2-Tone
Length< 1"
Connector Number2
Connector DetailSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
Terminal GenderFemale to Male
SpecificationsSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
ConductorCopper Conductor
FeaturesSATA 15Pin to 6Pin PCI-Express Power Adapter Cable
Cable Length0.8 ft.
StyleCable

Questions about this item

What length and gauge cable do I need to route from a SATA power port to a 6-pin PCIe socket?

The adapter is .8 ft long and uses 18 AWG copper conductors.

How do I connect the keyed SATA plug and latched PCIe receptacle without forcing them?

Align the 15-pin SATA male connector with the keyed rails on the PSU port, then press the 6-pin PCIe female connector onto the graphics card until the latch clicks.

When should I replace this 80 W adapter cable?

Replace it if the insulation shows cracking, the latch no longer holds, or the connectors become loose after repeated mating cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.