TeKit
TeKit RJ45 Male to Female POE Network Ethernet Cable with DC2.1 Power 0.5 ft Black Shielded
A shielded RJ45 male-to-female cable with DC 2.1 power pass-through for PoE cameras, 0.5 ft long
- TypeDC2.1 Female Power supply RJ45 Network Cable 8P POE Network
- CatDC2.1 Female Power supply RJ45 Network Cable 8P POE Network
- Connector ARJ45
- Connector BRJ45
- Length0.5 ft.
- ColorBlack
- RJ45 male-to-female adapter extends PoE connections by 0.5 ft
- Shielded twisted-pair construction reduces electromagnetic interference on the line
- Integrated DC 2.1 mm jack injects auxiliary power for cameras or access points
- Eight-pin wiring preserves full Gigabit Ethernet throughput
- Black PVC jacket protects conductors during indoor installations
TeKit RJ45 POE Cable with DC2.1 Power
This TeKit cable combines an RJ45 male-to-female Ethernet link with a DC2.1 female power connector. It is built for installers who need to run both data and low-voltage power to a network camera, router or access point over a single short run. The shielded construction helps keep the signal clean in electrically noisy environments.
0.5 ft length and shielded 8-pin wiring
The cable measures 0.5 ft end to end and carries all eight conductors through shielded RJ45 connectors. That short reach decides whether the adapter fits between a wall jack or patch panel and the powered device without excess slack. The DC2.1 barrel accepts a 2.1 mm centre-positive supply so the camera or AP can draw power locally.
Fits tight camera mounts and patch-panel ends
Because the pigtail is only half a foot long, it tucks neatly behind a wall-mounted IP camera or inside a compact network enclosure. It frees the installer from running a separate mains lead to the device, but it cannot span a room or cross a ceiling void. Buyers who need more distance between the power injector and the endpoint should choose a longer POE run instead.
Highlights
- RJ45 male-to-female adapter extends PoE connections by 0.5 ft
- Shielded twisted-pair construction reduces electromagnetic interference on the line
- Integrated DC 2.1 mm jack injects auxiliary power for cameras or access points
- Eight-pin wiring preserves full Gigabit Ethernet throughput
- Black PVC jacket protects conductors during indoor installations
Specifications
| Type | DC2.1 Female Power supply RJ45 Network Cable 8P POE Network camera Cable 8Pin Male to Female POE Rj45 Network Line Wire |
|---|---|
| Cat | DC2.1 Female Power supply RJ45 Network Cable 8P POE Network camera Cable 8Pin Male to Female POE Rj45 Network Line Wire |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 0.5 ft. |
| Color | Black |
| Shielded | Yes |
| Features | DC2.1 Female Power supply RJ45 Network Cable 8P POE Network camera Cable 8Pin Male to Female POE Rj45 Network Line Wire |
Questions about this item
How much length does the 0.5 ft cable add to a camera run?
The cable is 0.5 ft long, so it adds roughly six inches between the PoE source and the device.
What does the 8P RJ45 wiring carry besides data?
The 8-pin RJ45 connectors pass all four PoE pairs through to the female end while the DC 2.1 mm jack taps power separately.
Will the 2.1 mm DC jack fit my camera's power input?
The jack has a 2.1 mm inner diameter, the common size for many IP cameras and access points.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



