Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
TeKit
Turns one PCI-e x1 slot into four using a USB 3.0 link with a Pericom bridge chip
This TeKit riser card converts a single PCIe x1 motherboard slot into four additional x1 slots. It is intended for builders who need extra expansion capacity on boards with limited native connectors. The kit includes a main card, two equipment cards and a USB 3.0 cable linking them. It targets desktop and server platforms that require more add-in cards than the motherboard provides.
The Pericom PI7C9X bridge chip handles switching between the multiplied lanes without active cooling. Power is drawn through the host slot and the USB 3.0 link, keeping consumption low during typical operation. No fan or heatsink is fitted, so noise remains negligible in normal use. The design relies on passive dissipation suited to light workloads.
Each divided slot operates in gen2 mode with a practical throughput around 150 MB/s after overhead. The upstream USB 3.0 connection caps theoretical bandwidth at 625 MB/s, while a native PCIe x1 gen2 lane offers 250 MB/s. Performance scales with the host slot version; gen3 (3.0) upstream is recommended for best results. Not suited for high-bandwidth cards that exceed the multiplied lane budget.
| Brand | Tekit |
|---|---|
| Model | PCI-e Express 1x to 4 Port 1x Switch Multiplier Splitter Hub Riser Card with USB 3.0 Cable |
| Type | PCI-e Express 1x to 4 Port 1x Switch Multiplier Splitter Hub Riser Card with USB 3.0 Cable |
Insert the main card into a PCIe x1 slot on the motherboard. Connect the two equipment cards to each other with the supplied USB 3.0 cable, then link them to the main card. Ensure the motherboard slot is PCIe 2.0 or 3.0 for full bandwidth.
The Pericom PI7C9X bridge chip is a solid-state component with no moving parts and requires no scheduled maintenance. The USB 3.0 cable carries the 5 Gbps link between cards; inspect it periodically for physical damage and replace only if the connector or wiring fails.
The USB 3.0 interconnect caps theoretical throughput at 5 Gbps (625 MB/s). After protocol overhead the practical ceiling is about 150 MB/s shared across the four ports, which becomes the bottleneck before the individual PCIe 1x gen2 limit of 250 MB/s per slot.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?