We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Y-shaped IEC C14 to dual C21 power splitter adapter

TeKit

TeKit PA0253 IEC C14 to Dual C21 Splitter Adapter

SKU CH-XYRD-2BSQA

Connects a C14 inlet to two C21 outlets for UPS or PDU power distribution

  • ColorBlue
  • Changer TypeIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Mal
  • SpecificationsIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Mal
  • FeaturesIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Mal
  • Package Contents1pack
  • Splits one C14 inlet into two C21 outlets
  • Handles up to 15 A at 250 V on the C14 side
  • Each C21 rated for 16 A at 250 V or 20 A at 125 V
  • Lets you run two high-power devices from a single UPS or PDU port
  • Moulded PVC body with pure-copper conductors for reliable power delivery

Splitter adapter for UPS power distribution

This IEC 320 C14 to dual C21 Y splitter connects a single C14 inlet to two C21 outlets. It is built for UPS and PDU installations where a standard C13 power cord must feed equipment with C20 inlets. The moulded PVC body uses pure copper conductors and is supplied as a single unit in blue.

Current rating mismatch decides fit

The male C14 plug is rated at 10 A, 13 A or 15 A at 125 V while each female C21 connector is rated at 16 A at 250 V or 20 A at 125 V. The adapter is marked for 15 A and 250 V overall. Buyers must ensure the upstream circuit and C14 inlet can supply the combined load without exceeding the lower C14 rating.

Sustained load limited by C14 inlet

Under continuous operation the 10 A to 15 A C14 rating governs the total current available to both C21 branches. The higher 16 A or 20 A C21 ratings only apply to each individual outlet and cannot be summed beyond the C14 limit. Installations that demand more than 15 A combined should use a different power distribution method.

Highlights

  • Splits one C14 inlet into two C21 outlets
  • Handles up to 15 A at 250 V on the C14 side
  • Each C21 rated for 16 A at 250 V or 20 A at 125 V
  • Lets you run two high-power devices from a single UPS or PDU port
  • Moulded PVC body with pure-copper conductors for reliable power delivery

Specifications

BrandTekit
ModelPA0253
ColorBlue
Changer TypeIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Male to 16A 20A UPS PDU Power Adapter
SpecificationsIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Male to 16A 20A UPS PDU Power Adapter
FeaturesIEC 320 C14 Male to Dual 2*C21 Female Power Adapter, IEC Male to 16A 20A UPS PDU Power Adapter
Package Contents1pack

Questions about this item

What does the 15 A / 250 V rating mean when I plug this splitter into my rack PDU?

The C14 inlet is rated at 15 A / 250 V, so the combined draw of both C21 outlets must stay at or below 15 A at 250 V to avoid overloading the inlet.

How does the IEC 320 C14 inlet limit what I can connect downstream?

The C14 male plug accepts only a standard C13 cord rated at 10 A / 13 A / 15 A / 125 V, so the upstream cable and fuse set the hard ceiling for total power.

Will the moulded PVC body fit side-by-side with other cables in a 1 U cable tray?

The blue moulded PVC housing is a compact Y-splitter; its width is roughly two C21 connectors side by side, so it fits typical 1 U trays if adjacent ports have a few millimetres clearance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.