We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6-inch cable with black Molex 4-pin plug splitting to two black SATA power connectors

TeKit

TeKit NTRC100107W Molex 4-Pin to 2× SATA power cable 0.5 ft

SKU CH-Z433-9M39X

Converts a single Molex 4-pin connector into two SATA power plugs for SATA I and SATA II drives using an 18 AWG cable

  • TypeATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter
  • ColorMulti-Color
  • Length< 1"
  • Cable Length0.5 ft.
  • Connector Number2
  • Connector DetailATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter
  • Converts legacy Molex power to two SATA drives
  • Six-inch length keeps cable routing tidy
  • 18 AWG conductors deliver reliable current
  • Male-to-male terminals ensure secure connections
  • Compatible with SATA I and SATA II devices

TeKit Molex-to-Dual-SATA Power Adapter

This short cable converts a single four-pin Molex connector into two SATA power plugs. It suits builders adding SATA drives to a power supply that only offers legacy Molex leads. The 0.5 ft length keeps excess cable out of tight chassis spaces. New condition ensures clean contacts for reliable power delivery.

Splits One Molex Into Two SATA Connectors

Each branch ends in a standard 15-pin SATA power connector so two hard drives or SSDs can share one Molex rail. The 18 AWG wires handle the current draw of typical SATA I and SATA II devices without voltage drop. Multi-colour insulation helps trace each leg during installation. No additional adapters or software are required.

Male-to-Male Layout With 18 AWG Conductors

Both ends are male, plugging directly into the PSU Molex socket and the drive SATA ports. The short 0.5 ft run reduces clutter and improves airflow in compact builds. Sturdy moulded connectors resist accidental unplugging during drive swaps. Designed for internal desktop use where Molex power is still present.

Highlights

  • Converts legacy Molex power to two SATA drives
  • Six-inch length keeps cable routing tidy
  • 18 AWG conductors deliver reliable current
  • Male-to-male terminals ensure secure connections
  • Compatible with SATA I and SATA II devices

Specifications

BrandTeKit
ModelNTRC100107W
TypeATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter Cables for SATA I and SATA II Hard Drive
ColorMulti-Color
Length< 1"
Cable Length0.5 ft.
Connector Number2
Connector DetailATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter Cables for SATA I and SATA II Hard Drive
Terminal GenderMale to Male
SpecificationsATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter Cables for SATA I and SATA II Hard Drive
FeaturesATA Adpater Molex 4-Pin PC power cable to 2 x SATA Converter Cables for SATA I and SATA II Hard Drive
StyleCable

Questions about this item

Will the 18 AWG wires on this Molex-to-SATA adapter need replacement over time?

The 18 AWG conductors are rated for typical SATA drive currents and do not have a scheduled replacement interval.

What is the first limit reached when powering two SATA drives continuously from one Molex connector?

The single Molex 4-pin source limits total current to the supply's rail rating, which is reached before the cable itself.

Does the 0.5 ft cable generate noticeable heat or noise during all-day operation?

The short 18 AWG cable runs cool and silent because it has no moving parts and minimal resistive loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.