We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA IDE to USB 2.0 adapter cable with multiple drive connectors

TeKit

TeKit NTRC100106W SATA/IDE to USB 2.0 Adapter Cable

SKU CH-87H5-CBXG1

Connects 2.5, 3.5 and 5.25 inch SATA or IDE drives to USB 2.0 at up to 480 Mb/s with plug-and-play support for Windows and Mac OS

  • ColorBlack
  • Cable Length3 ft.
  • Connect 2.5, 3.5 and 5.25-inch drives via USB 2.0
  • Supports SATA and IDE hard drives up to 320G
  • Works with Windows 2000, ME, XP, Vista and Mac OS
  • Hot-swappable plug-and-play design needs no driver installation
  • 3 ft cable enables flexible external drive positioning

Universal Drive Adapter

The TeKit NTRC100106W connects 2.5-inch, 3.5-inch and 5.25-inch SATA or IDE hard drives and optical drives to a computer through a USB 2.0 port. It is intended for technicians and hobbyists who need to recover data or repurpose legacy storage without installing it inside a case.

USB 2.0 Speed Limit

The interface caps transfer rates at 480 Mb/s, so mechanical drives will not reach their native throughput and large archives move slowly. The adapter draws power from the bus for smaller drives, but 3.5-inch and 5.25-inch units require their own supply which is not included. Drives larger than 320 GB are not supported by the bridge electronics.

Compact Cable Build

A 3 ft black cable keeps the work area tidy while the integrated converter heads eliminate loose dongles. Hot-swap capability lets you change drives without rebooting, and the plug-and-play design works on Windows 2000 through Vista and Mac OS without drivers. Jumper pins on IDE devices must be set to master before use.

Highlights

  • Connect 2.5, 3.5 and 5.25-inch drives via USB 2.0
  • Supports SATA and IDE hard drives up to 320G
  • Works with Windows 2000, ME, XP, Vista and Mac OS
  • Hot-swappable plug-and-play design needs no driver installation
  • 3 ft cable enables flexible external drive positioning

Specifications

BrandTeKit
ModelNTRC100106W
ColorBlack
Cable Length3 ft.

Questions about this item

Should I pick the 2.5, 3.5 or 5.25 inch connector for my drive?

The adapter includes all three connectors in one cable, so you simply attach the one that matches your drive’s form factor — 2.5-inch laptop drives, 3.5-inch desktop drives or 5.25-inch optical drives up to 320G.

What does the 480 Mb/s transfer rate mean when I copy files?

480 Mb/s is the theoretical USB 2.0 ceiling; real-world throughput will be lower due to protocol overhead and the drive’s own speed, but it is sufficient for moving documents, photos and backups from legacy drives.

Does the USB 2.0 interface limit the speed of a SATA drive?

Yes — the USB 2.0 link caps at 480 Mb/s, so any SATA drive connected through this adapter will run at USB 2.0 speeds rather than its native SATA rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.