We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-pin PWM fan splitter cable with three connectors, 1 ft 30 cm long

TeKit

TeKit NTRACAFCE0001 4-pin PWM fan splitter 1 ft 30 cm

SKU CH-VA95-DJQ8D

Connects one motherboard 4-pin header to two PWM fans with a 1 ft shielded cable

  • TypePC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitte
  • ColorBlack
  • Length1 ft.
  • Connector Number3
  • Connector DetailPC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitte
  • Terminal GenderMale to Female
  • Connect two fans from one PWM header
  • 30 cm cable reaches nearby headers
  • Shielded wiring reduces signal interference
  • Male-to-female design fits standard 4-pin and 3-pin plugs
  • One tachometer line ensures accurate CPU speed reporting

TeKit 4-pin PWM fan splitter

This adapter takes one motherboard 4-pin PWM header and splits it to two 4-pin or 3-pin fan connectors. Builders who need to run a pair of case or CPU fans from a single header will find it fits standard PWM pinouts. The 30 cm cable keeps routing tidy inside compact chassis.

Single-header speed control limit

Only one of the two fan connectors carries a tachometer wire so the motherboard can monitor and regulate speed from that fan alone. The second fan receives the same PWM signal but reports no RPM data back to the board. Systems that require independent speed curves for each fan cannot use this splitter.

30 cm cable length

The fixed one-foot lead determines how far the splitter can reach from the header to the fan pair. Installations where the header sits farther than 30 cm from the mounting points will need a different cable. No longer or shorter versions are included.

Highlights

  • Connect two fans from one PWM header
  • 30 cm cable reaches nearby headers
  • Shielded wiring reduces signal interference
  • Male-to-female design fits standard 4-pin and 3-pin plugs
  • One tachometer line ensures accurate CPU speed reporting

Specifications

BrandTeKit
ModelNTRACAFCE0001
TypePC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitters Extension Adapter Cable
ColorBlack
Length1 ft.
Connector Number3
Connector DetailPC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitters Extension Adapter Cable
Terminal GenderMale to Female
SpecificationsPC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitters Extension Adapter Cable
ShieldingYes
FeaturesPC Motherboard Fan Cooling 4-Pin to 2x 4pin/3pin PWM Splitters Extension Adapter Cable

Questions about this item

Should I pick the 1 ft or 30 cm length option?

They are the same cable; 1 ft equals 30 cm so there is no separate version to choose.

Will both fans report speed to the motherboard when I use this splitter?

Only one fan sends a tachometer signal back; the second connector omits the sense wire so the board reads a single RPM value.

Does the 4-pin PWM header limit the fans to PWM control only?

The splitter accepts 4-pin PWM and 3-pin voltage fans; the motherboard header type decides whether control is PWM or voltage-based.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.