We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with 4-pin female and 8-pin male connectors

TeKit

TeKit NTRA4T8PSCC-C 4 Pin P4 to 8 Pin P8 12V internal power cable

SKU CH-EQMJ-Q4R2F

Converts a 4-pin ATX 12V connector to an 8-pin EPS 12V motherboard socket

  • Type4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
  • Length< 1"
  • Specifications4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
  • Connector Number2
  • Connector Detail4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
  • Terminal GenderMale to Female
  • Converts 4-pin CPU power to 8-pin EPS 12V socket
  • Male-to-female design connects PSU to motherboard directly
  • Under 1 inch length keeps cable routing tidy
  • Two connectors provide secure 12V power delivery
  • Brand-new TeKit adapter for ATX power supply upgrades

Power-supply adapter for 8-pin CPU sockets

This TeKit cable converts a standard 4-pin ATX 12V connector into an 8-pin EPS 12V plug so a newer motherboard can draw auxiliary CPU power from an older power supply. The male-to-female layout mates directly with the existing supply lead and the board socket without extra wiring.

Passive connector with no active components

The short adapter adds no fan, circuitry or voltage regulation, so it introduces no audible noise and draws no power of its own. Thermals and overall system power consumption remain entirely dependent on the power supply and motherboard already in use.

Converts 4-pin ATX 12V to 8-pin EPS 12V only

Builders whose power supply already provides an 8-pin CPU connector or who need to split one 8-pin into two 4-pin plugs cannot use this adapter. It serves a single, specific conversion and does not support other pin counts or voltage rails.

Highlights

  • Converts 4-pin CPU power to 8-pin EPS 12V socket
  • Male-to-female design connects PSU to motherboard directly
  • Under 1 inch length keeps cable routing tidy
  • Two connectors provide secure 12V power delivery
  • Brand-new TeKit adapter for ATX power supply upgrades

Specifications

BrandTeKit
ModelNTRA4T8PSCC-C
Type4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
Length< 1"
Specifications4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
Connector Number2
Connector Detail4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable
Terminal GenderMale to Female
Features4 Pin P4 /12V to 8 Pin P8 /12V Power Supply Converter Cable

Questions about this item

How do I connect the TeKit NTRA4T8PSCC-C adapter to my power supply and motherboard?

Plug the 4-pin female end into the power supply's 12V 4-pin connector, then insert the 8-pin male end into the motherboard's EPS 12V socket. The short length means you must route it before securing the board.

Will the connector pins or housing degrade and need replacement?

The male and female terminals are solid metal contacts rated for standard ATX mating cycles; no scheduled replacement is required unless physical damage occurs.

What power limit appears first when the CPU draws sustained current through this adapter?

The 4-pin source connector on the power supply is rated for 12V delivery, so its current ceiling becomes the bottleneck before the 8-pin side saturates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.