We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit NEMA 5-15P to C19 6 ft 14 AWG 16A 250V computer power cord

SKU CH-D59F-XWVQQ

Connects a standard North American plug to a C19 inlet for high-power equipment up to 16 amps and 250 volts

  • TypeCable Connectors
  • ColorBlack
  • Length6 ft.
  • Connector Number2
  • Connector DetailNEMA 5-15P to C19,6ft/1.8m, 3X14 AWG(2.08mm2), 16A, 110-250V
  • Terminal GenderMale to Female

Length 6 ft.

  • 6 ft.
  • 10 ft.

Struck-through versions exist but are not stocked here.

  • Connects standard US outlets to C19 equipment with a NEMA 5-15P plug
  • Handles up to 16 amps at 250 volts for high-power devices
  • 6 ft 14 AWG copper cable with three 41-strand conductors
  • UL and cUL listed for verified safety compliance
  • Molded 35P PVC connectors resist wear at both ends

NEMA 5-15P to C19 power cord

This cord connects a standard NEMA 5-15P wall outlet to an IEC C19 inlet on servers, UPS units or network equipment. It uses 14 AWG copper conductors rated for 16 amps at up to 250 volts. The moulded PVC connectors and SJT jacket are UL and cUL listed for safety.

For high-current rack gear, not desktop PCs

IT technicians extending power to rackmount switches, routers or PDUs will find the 6 ft length and 16 A rating suitable. Builders assembling ordinary workstations or gaming rigs should look elsewhere because those systems typically use C14 inlets and lower amperage cords.

16 A rating at 250 V

The single specification that decides fit is the 16 ampere, 250 volt rating on a C19 female connector. Verify that the target device draws no more than 16 A and accepts a C19 inlet before ordering.

Highlights

  • Connects standard US outlets to C19 equipment with a NEMA 5-15P plug
  • Handles up to 16 amps at 250 volts for high-power devices
  • 6 ft 14 AWG copper cable with three 41-strand conductors
  • UL and cUL listed for verified safety compliance
  • Molded 35P PVC connectors resist wear at both ends

Specifications

Brandtekit
TypeCable Connectors
ColorBlack
Length6 ft.
Connector Number2
Connector DetailNEMA 5-15P to C19,6ft/1.8m, 3X14 AWG(2.08mm2), 16A, 110-250V,UL Listed,UPS Supply Power Cord
Terminal GenderMale to Female
SpecificationsNEMA 5-15P to C19,6ft/1.8m, 3X14 AWG(2.08mm2), 16A, 110-250V,UL Listed,UPS Supply Power Cord
FeaturesNEMA 5-15P to C19,6ft/1.8m, 3X14 AWG(2.08mm2), 16A, 110-250V,UL Listed,UPS Supply Power Cord
Style1-Pack

Questions about this item

Will the NEMA 5-15P plug and C19 receptacle fit a standard US wall outlet and a server PDU?

The NEMA 5-15P male plug fits a standard 15 A US wall outlet. The IEC 60320 C19 female receptacle matches the inlet on many rack-mount PDUs and high-power network gear.

How do I install the cord and what step is often missed?

Push the C19 end firmly into the device inlet until the molded latch clicks, then insert the 5-15P plug into the outlet. The step often missed is verifying the latch is fully seated so vibration cannot unseat the connector.

When should I replace this 14 AWG cord?

Inspect the PVC jacket and molded ends regularly; replace the cord if you see cracks, discoloration, melted plastic, or if the C19 latch no longer holds securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.