We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial NEMA 6-15P locking plug, nylon body, brass blades, 15A 250V

TeKit

TeKit LK7615P computer power cord NEMA 6-15P 15A 250V

SKU CH-PNE1-64M6N MPN LK7615P

Industrial-grade NEMA 6-15P plug rated 15 A at 250 V, UL listed for generators and heavy equipment

  • ColorBlue
  • SpecificationsIndustrial Grade 15A 250V Straight Blade Plug, NEMA 6-15P, 2
  • FeaturesIndustry Grade Anti-shedding Plug, NEMA 6-15P Locking Plug,
  • Package Contents1pack
  • Industrial-grade nylon housing resists impact and chemicals
  • Brass blades and contacts deliver low-resistance conductivity at 15A 250V
  • Screw-down strain relief locks the cable securely in place
  • Internal wiring chambers isolate conductors to prevent arcing
  • UL listed and CSA certified for safety compliance

Industrial NEMA 6-15P Plug

The TeKit LK7615P is a straight-blade locking plug rated at 15A and 250V for 50/60Hz circuits. It is built for installers and technicians who need a reliable connector on generators, industrial machinery or heavy-duty audio equipment. The nylon housing and brass contacts are UL listed and CSA certified for demanding environments.

15A 250V Circuit Limit

This plug is designed for two-pole, three-wire grounding circuits that do not exceed 15 amps at 250 volts. It cannot be used on higher-amperage services or on voltages outside the rated 250V. The 3.75 kW payload ceiling is fixed by the NEMA 6-15P standard and the device markings.

Locking Straight-Blade Design

The defining feature is the NEMA 6-15P locking configuration that secures the cord against accidental disconnection. Screw-down strain relief clamps the cable while internal wiring chambers isolate conductors to prevent arcing. Buyers who need a non-locking connector or a different NEMA pin layout must select another part.

Highlights

  • Industrial-grade nylon housing resists impact and chemicals
  • Brass blades and contacts deliver low-resistance conductivity at 15A 250V
  • Screw-down strain relief locks the cable securely in place
  • Internal wiring chambers isolate conductors to prevent arcing
  • UL listed and CSA certified for safety compliance

Specifications

BrandTekit
ModelLK7615P
ColorBlue
SpecificationsIndustrial Grade 15A 250V Straight Blade Plug, NEMA 6-15P, 2P, 3W, 66220-BK, Black
FeaturesIndustry Grade Anti-shedding Plug, NEMA 6-15P Locking Plug, 15A 250V,Generator Plug,Wiring Plug Straight Blade Cord Connector
Package Contents1pack

Questions about this item

Should I choose the 15 A 250 V version or a lower-rated plug for my generator?

The LK7615P is rated 15 A at 250 V, delivering up to 3.75 kW; select it when your equipment draws up to 15 A on a 250 V supply.

What does the 15 A 250 V rating mean once the plug is wired into my equipment?

It means the plug can continuously carry 15 A at 250 V AC, 50/60 Hz, for a maximum load of about 3.75 kW without overheating.

The plug is listed as NEMA 6-15P — what does that standard cap in practice?

NEMA 6-15P defines a 2-pole, 3-wire grounding straight-blade connector rated 15 A, 250 V, so it caps the circuit at 15 A on 250 V supplies.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.